BT 4000 Classic manual To set the dialling mode, Features

Diverse 4000 Classic ~10th Edition ~ 19th September ’01 ~ 4167

To set the dialling mode To set the recall time

GENERAL INFORMATION

You need only adjust this setting if your switchboard does not operate with the pre-set tone dialling. You can change the dial mode to pulse dialling.

MENU	Press the MENU options
	button.
	Press the DOWN button
	until the display shows
	BASE SET.
OK	Press the OK button.
	Press the DOWN button
	until display shows ADD
	FEATURES.
OK	Press the OK button.
	Display shows DIAL MODE.
OK	Press the OK button.
	Press the DOWN button to
	select:
	TONE (with TBR)
	PULSE (with Earth Recall)
	DTMF-EARTH (tone with
	Earth loop recall)
OK	Press the OK button to
	confirm. The display shows
	SAVED.
	Press the RED PHONE
	button until you reach the
	idle screen.

You need only adjust this setting if your switchboard requires a different recall time to the pre-set recall time of 100 MS.

MENU	Press the MENU button.
	Press the DOWN button
	until the display shows
	BASE SET.
OK	Press the OK button.
	Press the DOWN button
	until display shows ADD
	FEATURES.
OK	Press the OK button.
	Press the DOWN button
	until display shows TBR.
OK	Press the OK button.
	Press the DOWN button to
	select the flash time 80,
	100, 120, 180, 250 or 300ms.
OK	Press the OK button to
	confirm. The display
	shows SAVED.
	Press the RED PHONE
	button until you reach the
	idle screen.

Please note

100 MS is the standard setting for most UK switchboards.

40