Diverse 5200 handset & charger ~ 4th Edition ~ 20th May ’03 ~ 5189
SETTING UP
If the icons on the display
flash continuously...
It means that the handset is not registered with the base station.
Ensure you have correctly carried out step 3 above. If the product has still not registered, please see “Registering manually” below.
All additional handsets you purchase will need to be individually registered with the base station before they will work with the BT Diverse 5200.
Leave the handset for approx. 16 hours in the base station to charge the batteries, as they are not charged in the factory. The battery status icon flashes on the handset to indicate that the batteries are being charged.
To manually register a
BT Diverse 5200 handset to another base station
If you want to register your handset to another base station you will need to manually register it.
On the handset to be registered:
MENU Press the MENU options button.
Press the DOWN navigation button until the display shows Handset Settings.
OK Press the OK options button.
Press the DOWN navigation button until the display shows Register Handset.
OK Press the OK options button.
Enter system PIN.
OK Press the OK options button.
If the base station is a
BT Diverse 5210 or 5250 base press the PAGE button for approximately three seconds.
After approximately one minute the handset will display its internal number. The handset is now registered and the handset display will return to the idle screen.
If the base is not a 5210 or 5250 you will need to follow the user guide for the base station you are registering the 5200 handset to.
Note
To make internal calls see page 22.
BT Diverse Helpline – 08457 908 070
12