Diverse 5200 handset & charger ~ 4th Edition ~ 20th May ’03 ~ 5189
SETTING UP
Battery performance
Batteries and case may become warm during charging. This is normal.
Under ideal conditions, the handset batteries should give about 13 hours talktime or 170 hours standby time on a single charge. However, new NiMH batteries do not reach their full capacity until they have been in normal use for several days.
The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries are available from
www.withandwithoutwires.com or call 0870 240 5522.
If you replace the handset batteries with ones that have been fully charged, the battery indicator will not show full until the next charge cycle has been completed. Charge the handset until the batteries register full again. From then on the display will be correct.
Note
If you subscribe to a Caller Display service the time and date will be set with the first incoming call.
However, the year setting will have to be changed manually. See opposite.
Setting the date and time
MENU Press the Menu options button.
Press the DOWN navigation button until the display shows Calendar/Clock.
OK Press the OK options button. Date/Time appears.
OK Press the OK options button.
Enter the day/month/year, e.g. 05 10 03 for 5th October 2003.
OK Press the OK options button.
Enter the time – hours/minutes. e.g. 0925 for 9:25am.
OK Press the OK options button.
Use the UP/DOWN navigation buttons to select am/pm if in 12 hour mode.
OK Press the OK options button.
Press the DOWN navigation button to Time Mode.
OK Press the OK options button.
Use the UP/DOWN navigation buttons to select 12 or 24 hour display (12hr is the default).
OK Press the OK options button.
Press the RED PHONE button until you reach the idle display.
BT Diverse Helpline – 08457 908 070
14