8423 Hub Phone 1020 Iss.3 [1] 12/10/07 12:25 Page 7
Hub Phone 1020 – Issue 3 – Edition 1 – 05.10.07.07 – 8423
Getting started | 7 |
|
Location
You need to place your BT Hub Phone in the charger cradle and then place both handset and charger cradle in the BT Home Hub to set it up. When you are doing this you don't need to use the power supply provided as the handset and charger cradle take their power from the hub. After this you can place the handset and charger cradle anywhere in the house where there is mains power and you can then use the power supply provided.
You will need to place your handset and charger into the hub from time to time to receive updates and new services to your phone as your BT Hub Phone 1020 is fully upgradeable.
Setting up the handset
1.Remove the grey cover from the front of the BT Hub.
If it does not come off easily,
carefully apply a little more force.
WARNING
Do not place your BT Hub Phone 1020 in the bathroom or other humid areas.
Handset range
The BT Hub Phone 1020 has a range of 300 metres when there is a clear line of sight between the hub and the handset. When there is no clear line of sight between the hub and the handset, the range could be reduced to 50 metres. Thick stone walls can severely affect the range.
Signal strength
The icon on your handset indicates when you are in range.
When it flashes, you are out of range.
When you move out of range of the base, you will hear the out of range tone. This tone is repeated until you move back into range.