Cisco Systems 7925G Placing a Call-Additional Options, For more information, Directory Speed

Basic Call Handling

•If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system administrator for more information.

•If you hear a beep tone from your phone, you might be out of range of the wireless network. Move

to a location where you can see a strong signal icon	on the phone if you wish to use your
phone.

Placing a Call—Additional Options

You can place calls using special features and services that might be available on your phone. See your system administrator for more information about these additional options.

							For more information,
If you want to...	Then...						see...
Speed dial a contact number	Do one of the following:						Using the Phone Book
in your local phone book	•	Press and hold a speed-dial hot key for					on Your Phone,
							page 82
		about two seconds.
	Note If dialing a two-digit number, enter the						Speed Dialing, page 52
		first digit, then press and hold the
		second digit for about two seconds.
	•	Choose		(Directory)> Speed
		Dials, highlight a speed dial, and
		press	.
Speed dial a phone number	1.	Press	.				Speed Dialing, page 52
(for a Line View speed-dial	2.	Scroll to a speed dial			.
number set up on the web)
	3.	Press	or	to make the call.
Place a call while another	1.	Press Hold.					Using Hold and
call is active (using a	2.	Press	.				Resume, page 39
different line)
	3.	Scroll to another line and press				.
	4.	Dial a number.
	5.	Press	to make the call.
Place the call on a	1.	Press	and scroll to another line.				Switching Between
secondary line	2.	Dial a number.					Multiple Calls, page 41
	3.	Press	to make the call.

Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 35