Topcom Butler 3350/Twin/Triple/Quattro
5.7Setting the volume
During a conversation you can set the volume by pressing the Volume button 
. You can set the volume alternatively in Hi, Medium and Low.
The hands free receiver volume is also adjustable as above described!
5.8Paging
When you press the Paging button 
on the base unit, the handset emits a ringing signal for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a handset.
5.9Flash button (R)
When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
•Press and hold the redial button 
for 3 sec.
•The display will show: ‘S’ for 100ms
or ‘L’ for 250ms
•The flash time setting will disappear after 2 sec. from the display
5.10 Setting the ring volume and melody
5.10.1 Handset melody
•Press and hold the melody button 
until the current melody is heard.
•Select the desired melody 
or by entering a number (1 - 9).
•Press 
again to confirm the setting
5.10.2 Handset ring volume
•Press the volume button 
in standby
•The handset will ring in the current volume
•Press 
to select the desired volume
•Press ’0’ to turn the volume OFF
ENGLISH
Topcom Butler 3350/Twin/Triple/Quattro | 11 |