Checking Day/Time, Programming the VIP Code

Topcom Butler 3350/Twin/Triple/Quattro

•Press the key to confirm the day.

•The internal voice will ask you to set the hour.

•Press a few times on or keys to set the hour.

•Press the key to confirm the hour.

•The internal voice will ask you to set the minutes.

•Press a few times on or keys to set the minutes.

•Press the key to confirm the minutes.

The complete day and time setting is then repeated for confirmation.

•If you do not press any keys for 8 seconds, the previous day/time setting is saved and the machine automatically exits the day/time

setting mode.

•When you use the machine for the first time and have not yet set the day/time, no day/time registration of incoming messages is recorded.

•If there is a loss of power to the base, the day/time must be re-entered.

9.8Checking Day/Time

•Press the key to announce the day/time. The internal voice will say the current day/ time setting.

The VIP code is a 3-digit code used to operate the machine remotely (see Remote Operation). The VIP code is set to '321' by default.

If there is a loss of power to the base, the VIP code will revert to '321'.

•Keep the - key pressed down for 2 secs to change the VIP code.

•The internal voice asks you to set the VIP code and says the first number.

•Press a few times on or keys to set the first number of the VIP code.

•Press the key to confirm the first number. The internal voice says the current set 2nd digit of the VIP code.

•Press a few times on or keys to set the second digit of the VIP code.

•Press the key to confirm the second number. The internal voice says the current set 3rd digit of the VIP code.

•Press a few times on or keys to set the third digit of the VIP code.

•Press the key to confirm the VIP code. You will hear a long beep. The internal voice says the new VIP code for confirmation.

Topcom Butler 3350/Twin/Triple/Quattro