Topcom 3350 Turning Answering Machine On/Off, Setting number of Rings, Checking number of Rings

Page 18

Topcom Butler 3350/Twin/Triple/Quattro

9.4Turning Answering Machine On/Off

If the answering machine is on, the -LED will light up and the machine will automatically pick up the line after a number of rings (see 'Setting Number of Rings').

Press the key for 2 secs to switch on the answering machine. A voice confirms the setting and says which outgoing message is active (OGM 1 or OGM 2).

Press the key for another 2 secs to switch off the answering machine. A voice confirms the setting.

Even if the answering machine is off, the machine will automatically pick up after 10 rings in order to enable remote activation (see 9.15 Remote operation).

9.5Setting number of Rings

The number of rings after which the answering machine will answer calls can be set from

2 – 9 and TS (Toll saver). The standard setting is 3 rings. In Toll saver mode, the machine will answer after 5 rings if there are no new messages, and after 2 rings if there are new messages. If there are no new messages and you call your machine to check your messages remotely (see 9.15 Remote operation), you can hang up after the 2nd ring. You do not need to pay connection fees and you know that you do not have any new messages.

Briefly press the key. A voice will state the current number of rings.

Press the key for 2 secs to set the number of ringing tones.

Press the or key to change the current number of rings.

Confirm the setting by pressing the key. The current ring setting is confirmed by the internal voice.

If you do not press any keys for 3 seconds, the machine will revert back to the answering machine menu, without changing the settings.

If there is a loss of power in the base, the number of rings will revert to 3.

9.6Checking number of Rings

Press the key briefly.

The internal voice will state the number of rings set.

9.7Setting day and Time

The day and time setting of the answering machine is independent of the telephone component. The day and time of each call is registered and announced during play-back. The format of the hour depends on the language of the internal voice. e.g. English is in 12- hour format and German is in 24-hour format.

Programming the day and time:

Keep the -key pressed down for 2 secs.

The internal voice will ask you to set the day.

Press a few times on or keys to set the day. The internal voice states the current settings.

18

Topcom Butler 3350/Twin/Triple/Quattro

Image 18
Contents Butler 3350/TWIN TRIPLE/QUATTRO Page Caller-ID function Clip Buttons Display InstallationBattery low indication Operation Register/de-register a handsetTopcom Butler Safety Instructions CleaningDisposal of the device environment Buttons Installation DisplayBase Multi charger HandsetBattery low indication OperationOutgoing calls Programming memory numbers Incoming callsActivate/deactivate hands free function Calling a memory numberPaging Setting the volumeSetting the ring volume and melody Flash button RCaller-ID function Clip Setting the dialling modeSetting the ring volume level of the base Key lockRegister/de-register a handset Subscribing a Topcom Butler 300 Dect GAP Headset You only need to subscribe the handset ifCall transfer and conference call during an external call Call transfer and Intercom between two handsetsRemoving a handset Internal call intercomBase Key Functions Answering MachineLED Display & keys are at the bottom of the baseSelect outgoing message Outgoing MessagesRecording outgoing messages OGM 1 or OGM Erasing the Outgoing MessageTurning Answering Machine On/Off Setting number of RingsSetting day and Time Checking number of RingsChecking Day/Time Programming the VIP CodeChanging the VIP Code Playback of Incoming Messages and Memos OperationRecording a Memo Checking the VIP CodeErasing Messages Memory FullRemote Operation Troubleshooting Turning answering machine on remotelyTechnical data Default settingsTopcom warranty Visit our website