Sanyo POA-PN02C owner manual You can register up to 10 addresses

Page 84

Chapter 6 Appendix

Operation

QWhy can't I change the controls in the setting page with web browser?

APlease make sure the projector is turned on. If it is in the standby mode, the setting

is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition. Also, projectors registered for multi-control cannot have any controls changed if they are in standby mode. But timer and clock settings are always effective, even for projectors in standby mode.

QWhy does it sometimes take a lot of time to complete the page display?

AThe display speed of the page depends on the network environment in which both

the projector and computer are placed. It may take much time to complete the page display if network traffic is heavy. Please consult your network administrator. You can select the Light mode for displaying pages quickly (☞ p.26).

QI use many of the projectors in the network. How can I use names of the projectors to recognize each projector instead of IP addresses?

AYou can manage the projectors with nicknames instead of the IP address. Please see

item "Multi-control" for further information (☞ p.58).

By registering the projector name and IP address with the DNS server, it can be accessed with the nickname from the any computer referred to the DNS server. Please consult your network administrator.

QHow many numbers of the E-mail address can I register in the E-mail set- ting page.

AYou can register up to 10 addresses.

84

Image 84

Contents POA-PN02C PJ-Net Organizer plus C PLV-80/75 SeriesCompliance Federal Communication Commission NoticeModel Numbers POA-PN02C Trade Name Sanyo Responsible party AddressEnglish Contents Contents Use of Serial PortPage Chapter Features Web Management function +p.25Multi-control func Tion +p.58 TionOperating environment of PJ-Net Organizer PDA restrictionBefore use Package containsSafety rope PJ Camera Viewer softwareCamera mounting tool set Hook and loop fastener big Hook and loop fastener smallExpression/Abbreviation Use of this manualTrademarks Preparation Chapter Installation Flow of installation Installation and network configuration p.18-24Set up is complete Function of the network unit p.17Name and function of each part Installation and network configuration Tighten two screws by using a coin etcConnector cover Screw cover MountingConnection of LAN cable Network configuration Configure the networkDefault network configuration is set as follows Confirmation of the network menuConfiguration for IP Address/ Sub net/ Gateway*1/DNS*2 How to enter the numbersFixing the network configuration Completing of installationNetwork PIN code setting Displaying Network PIN code menuEntering the Network PIN code Fixing the Network PIN codeHow to enter the numbers with the screen 10-key pallet Installation Chapter Basic Setting and Operation Login the setting page of the projector Select a display mode and loginTion p.20. The default IP address is Enter the IP addressDisplay of main setting Main setting page in the Standard Mode displayHow to use the setting Main setting page in the Light Mode displayExample of the Setting Type of the setting pallet Text box settingPull-down menu setting Radio button settingInitial setting Use of BatteryPJLink and password setting To 32 alphanumeric characters can be used for the passwordWhats PJLink? Date and time setting Auto settingManual setting Network configuration When using the e-mail functionMum Mail setting Setting Smtp server and administrator addressMenu and follow the below steps TorRegistering and deleting E-mail addresses Option selection for sending alert mailLength of message should be less than 256 characters Examples Type and contents of alert mail When PJ lamp replacement time is reached When lamp corres. value reaches preselect use timeSnmp setting Enter user name of the projector etc. optionalEnter place of the projector optional CommunityCheck and delete the trap address TrapItem Description Up to 10 trap addresses can be registeredTrap option setting Trap optionChapter Controlling the Projector Power control and status check PJ statusPJ temp About projector condition Status DescriptionControls InputSystem Image adjustment Input sourceSound MenuPC adjustment Setting up the projector Natural wide, True There may not be availableTable below Sets the image top/bottom and left/right Full Zoom Normal Natural wide TrueLamp Corres. Value Reset Setting procedureExecute button Save the controls and settings Store/free the settingsUp to 18 characters can be used for the Memo Check the saved items Load a control setTimer setting How to set the timerSet a day or date Check the timer events Change the event modeSet an execute time Select an event actionEvent Projector information Items DescriptionIndication of the lamp status StatusControlling and setting the multi-projectors Multi-controlExample of multi control Multi control setting Start/stop the multi controlEnter projector name or installed location etc Word None is displayed if not using the Memo func- tionRegister the projector Confirmation of registered projectorChange the mode of the registered projector Mode OperationStatus Check & Change page in the light mode Setting all togetherControlling all together Chapter Use of Serial Port Serial port setting Setting examples for the serial control Control examples ExampleControlling AV equipment through network EquipmentPJ3 PJ2 PJ1 Use of telnet ControlPreparation When the word Hello is replied, login has been succeeded Command Function Control the projector with telnetChapter Appendix Examples of connection Peer-To-Peer connectionTo another network Gateway Router installed in the network Entrance hallWeb browser setting Active Script/JavaScript enableFlash Player enable Proxy settingActiveX controls and plug-ins setting Examples OS/BrowsersWindows XP Professional Internet ExplorerFlash Player Add-on setting Using proxy serverNot using proxy server JavaScript Setting Netscape NavigatorProxy setting Product specification Port specification Pin modular connector RJ-45Mini DIN-8pin connector Why doesn’t the setting page appear in my web browser? Projector setting Computer settingFollowing causes are possible. Please check them How can I restrict access from the computer What should I do when I forget the password? You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I develop a driver to control external serial equipment?Can I update the firmware of the network unit What is the MAC address assigned to the network unit? What are the rules for IP address assignment?MAC address is indicated on the case back as the below Ifff