•A “ ” mark moves to your selection and you return to the mode in which you were before pressing MENU .
Adjusting the LCD Contrast
Display Symbols and Part Names
Display Symbols
1.Press MENU
2.Press or the display.
3.Press C•CE contrast.
NEXT 2 to select “2: LCD CONTRAST”.
to darken or lighten | < LCD CONTRAST > |
after adjusting the | |
|
|
:A “beep” will sound when a key is pressed.
:The schedule alarm will sound.
CAPS : Capital (uppercase) letters will be entered. To enter small (lowercase) letters, turn “CAPS” off by pressing CAPS .
EDIT : The listing on the display can be edited.
Turning the Key Sound On and Off
1. Press MENU PREV 1 to select “1: KEY SOUND”.
2.Press 1 to turn the key sound on, or press 2 to turn it off.
<KEY SOUND >
1:ON
2:OFF
2nd : Indicates that 2nd has been pressed. Pressing another key in succession, to which the special function is assigned, performs the function, for example as introduced on page 31, “Shortcuts”.
: More information exists above the current display. (Press .)
: More information exists below the current display. (Press .)
S: Secret function is in effect. (Secret listings cannot be recalled without a password.)
: Indicates that the recalled listing is secret.
Freeing Up Memory
When you turn the power on, the following message may be displayed, asking you to free up memory by deleting unnecessary space.
: Indicates that the operating battery level is low.
•In the display examples of this manual, only the symbols necessary for explanation will be shown.
Press | Y | to delete space. Freeing up |
memory needs a maximum of | ||
approximately 2 minutes. | ||
Press | N | when you wish to start |
operation immediately. (Refer to page 16.)
DO YOU WANT TO FREE UP MEMORY ?
(Yes/No)
NOTES:
•The symbol “ ” shown by setting the LCD contrast to DARK is not used in this product.
•The “ ” mark indicates the alarm sound for the scheduled listings is turned on.
2