VTech DS3111-2, DS3111-4, DS3111-3, TM3111-2 Belt clip & headset optional, Headset

Installation

Belt clip & headset (optional)

For hands-free telephone conversations, use any industry standard 2.5mm headset (purchased separately). For optimal results, use a VTech 2.5mm headset.

Whenever a compatible headset is connected to the cordless handset, the microphone on the handset will be muted.

• To purchase a

headset, visit our

website at www.

vtechphones.com

or call 1 (800)

595-9511 in the

Installation

Headset

Plug the 2.5 mm headset into the jack on the side of the handset (beneath the small rubber flap).

Belt clip

To install the belt clip, snap the belt clip into the notches on both sides of the handset.

To release the belt clip from the handset, carefully pry one side up from the notch. The belt clip will now easily detach from the handset.

United States.

In Canada, go to

www.vtechcanada.

com or call

1 (800) 267-7377.

• If the sound

quality of the

headset is

unsatisfactory, try

unplugging and

firmly plugging it in

again.

Basic operation

IC:xxxxX-xxxxxxxx FCC ID: XXxxx-xxxx-xx IC:xxxxX-xxxxxxxx FCC ID: XXxxx-xxxx-xx

www.vtechphones.com