VTech DS3111-4, DS3111-2, DS3111-3, TM3111-2 important safety instructions Battery

Page 41

Battery

After the battery is fully charged, you can expect the following performance:

Operation	Operating time

While in use (talking)	8 hours

While not in use (standby*)	96 hours (4 days)

*The handset is off the telephone base or charger but not in use.

The battery needs charging when:

•A new battery is installed in the handset.

•The handset beeps.

•LOW BATTERY is displayed and the battery indicator on the handset display is flashing.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

1.Use only the batteries provided or equivalent. To order a replacement, visit our website at www. vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

2.Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions.

3.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

4.Exercise care in handling batteries in order not to create a short circuit with conductive materials such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns.

5.Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.

38	www.vtechphones.com

Image 41

Contents Congratulations Table of contents Table of contents Parts checklist InstallationCabinet outlet Telephone base & charger installationTelephone line cord Battery installation Charge light Battery chargingREGISTERED. To Adding a new handsetTo register a handset to your telephone base Troubleshooting section on To de-register all handsets Replacing a handsetBelt clip Belt clip & headset optionalHeadset MENU/SELECT Skip Handset layoutCID caller ID page 28 Play Voicemail REDIAL/PAUSEFind Handset Telephone base layoutRinger volume Telephone settingsRinger tone Ringer TONE, the sample of ringer tone will not be heardConfirmation tone Key toneLanguage Clear voicemail Voicemail setup Telephone settingsBasic operationTelephone settings Make, answer and end calls Basic operationSpeakerphone MuteCall waiting VolumeRinger mute Multiple handset useVoicemail Answer an incoming call during an intercom call IntercomFLASH, OFF/ Clear or INT Transfer an external callSwitch between external and internal calls Directory Advanced operationStore a directory entry Not Available AT this Time will be displayedCharacter chart Search the directory Press MENU/SELECT, and the screen displays Edit Number Advanced operation Handset XX Missed Calls Vtech Available AT this Time Saved Already Saved Unable to Save Call log display screen messages Display Means Redial Handset display screen messages Incoming Outside NEW Handset indicatorsUSE Telephone base indicators & charger indicatorBattery Problem Suggestion TroubleshootingLow Battery is Light on the telephone base or charger should be on Tone before dialing For this to take place Service company charges may apply Troubleshooting Numbers I need to To synchronize Important safety instructions Operating range MaintenanceAbout cordless telephones WarrantyHow do you get warranty service? FCC Part 68 and Acta FCC, Acta and IC regulationsFCC Part Industry Canada Rbrc SealTechnical specifications Index Index 91-001410-080-100 User’s manual