VTech v 2656 You Hear Other Calls While Using Your Phone, Common Cure For Electronic Equipment

Page 38

Additional Information

In Case Of Difficulty

You Hear Other Calls While Using Your Phone

•Disconnect your Base Unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company.

You Hear Noise In The Handset, And None Of The Keys Or Buttons Work

•Make sure the power cord is plugged in.

Common Cure For Electronic

Equipment

If the unit does not seem to be
responding normally, then try putting
the Handset in the cradle. If it does not
seem to respond, do the following (in
the order listed) :
1.	Disconnect the power to the
	Base.
2.	Disconnect the Handset battery.	then

3.Wait a few minutes.

4. Connect power to the Base.

5.Re-install the battery pack

6.Watch for Handset to display

Your Answering System is not recording messages

•Make sure your answering system is turned on (ON/OFF light should be glowing.)

•Make sure Announce Only is set to OFF.

CL is flashing on the Base Unit

•The Day and Time must be set. See Set the Clock on page 26

.

You can't hear your messages

•Make sure the Base volume is set above level 1.

38

91-005358-050-000 v2656.pmd

38

8/5/2004, 4:51 PM

Image 38

Contents Important Safety Instructions Vtech Communications INC Stop IntroductionParts Check List Handset Layout Base Unit Layout Setup Connecting Power to Base UnitInstallation of Battery Pack in Handset Checking for dial tone Charging Of Handset Battery PackConnecting to phone line Case of DifficultyWall Mounting Registration of Additional Handsets Registration and Operation of the v 2600 Accessory HandsetSetup of the v 2600 Accessory Handset Enter Base ID Code Found BaseBase Leds Handset and Base IndicatorsHandset Icons Icon DescriptionCaller ID Call Waiting ID Soft Menu FunctionsRDL Redial Calls Log Caller ID See To Edit a Number/Name, onRange Tone preset to on Handset SettingsLOW Batt Tone preset to on Keypad Tone preset to onRange EXTENDER, then press OK Tone/Pulse Selection preset to ToneRange Extender preset to Auto Range Extender menuRegister and Memory MemoryTo Store a Number/Name SaveSearch For and Dial a Number To Search For and Dial a Number NameTo Delete a Number/Name To Edit a Number/Name Answering Calls Handset and Base OperationMaking Calls Mute FunctionFrom Base to ALL Handsets Volume ControlFlash Function Use Indication Switching between the Handset Earpiece and SpeakerphoneHandsfree Speakerphone Operation Transferring Calls Low Battery IndicationConference Calling Answering System Operation Audible IndicatorsAnswering System Operation Turn Answering System On or OffRecord Your Announcement About MailboxesAbout Announcements AnsweringSystemOperationTo delete your announcement Answering System Feature SetupTo review your announcement Set Audible Message Alert Default setting indicated bySet Security Code OffListen to Messages Delete Messages Delete a Specific Message Adjust Playback VolumePress Volume or Volume Delete All Old Messages in a MailboxRecord a Memo Call ScreeningSteady for one second Counting 1 to99, flashing 40-99Remote Access Voice MenuHeadset Operation Belt ClipMaintenance Phone Doesnt Work At All Handset Does Not Ring When You Receive a CallCase Of Difficulty No Dial ToneYour Answering System is not recording messages You Hear Other Calls While Using Your PhoneCommon Cure For Electronic Equipment CL is flashing on the Base UnitHow long is the limited warranty period? Warranty StatementWhat does this limited warranty cover? What is not covered by this limited warranty?How do you get warranty service? Other LimitationsFCC Part FCC, Acta and IC RegulationsVTech Communications Inc Rights of the telephone company FCC and Acta InformationRepair instructions IC Industry Canada Programming/testing of emergency numbersHearing aid compatibility Rbrc R Seal Technical Specifications Nominal Effective RangeBasic Operation Table Of Contents Important Safety InstructionsGetting Started Advanced OperationIssue