VTech VT 1421 manual Special Features

Page 2

INTRODUCTION

Special Features:

900 MHz Operation.

Fully digital link between handset and base.

Digitally scrambled voice communication.

Alphanumeric Call Waiting Caller ID.

50 Caller ID memory locations.

2 row by 12 character 5x7 dot matrix alphanumeric display.

Backlit keypad and display on handset.

21 number / location programmable memory for up to 20 digit phone numbers.

10-channel operation with auto channel selection.

Out-of-Range indication while the handset is in use or in standby mode.

Removable handset battery pack.

Spare battery charger in base unit.

Battery backup in case of power failure (with optional spare battery pack installed in base).

Face up handset charging.

Easy answer - When the phone rings, simply press any key other than OFF to answer.

Auto hang up when returning the handset to the base cradle.

Extension in use indicator.

Message waiting indicator for use with voicemail service.

Multi-level REDIAL; stores last 5 numbers dialed.

24-bit digital security code.

Tone and Pulse dialing.

Low battery detect and warning indicator.

Up to 7 hours continuous talk time, or 7 days standby time.

Volume adjustment on Handset.

FLASH and MUTE functions.

Hearing-aid compatible receiver.

Detachable power supply.

Non-volatile storage of security code, Caller ID and memory dial records.

Wall mountable base unit.

2.5mm Headset Jack for hands- free operation.

This manual is designed to make you familiar with the VT 1421. We strongly recommend you read the entire manual before using your phone.

2

Image 2
Contents Introduction Special Features Parts Checklist FCC Part FCC RegulationsHearing Aid Compatibility FCC Regulations Important Safety Instructions ReadandunderstandallinstructionsImportant Safety Instructions To Charge the Battery Pack Battery PackCharging the Handset Battery Pack Word about Rechargeable BatteriesTo Replace the Handset Battery Pack Power Backup Function Spare Battery ChargerInstallation Replacing a Drained Handset BatteryGetting Started Connect Telephone Line Cord If not, see in Case of DifficultyWall Mounting Handset Layout Base Unit Layout Base Unit Features Key / Handset locatorOff Hook Stage Quick Reference GuideHandset Menu Operation On Hook Stage Answering Calls SetupMaking Calls Ending a CallDialing From Memory Deleting Speed Dial MemoryUsing Redial Caller IDWord About Caller ID Caller IDCall Waiting Caller ID Type Receiving And Storing CallsDigit Dialing Reviewing Caller ID MemoryDialing From Caller ID Memory Special Message Indicators Deleting Call ID MemoryCaller ID Message Waiting Advanced FunctionsCall Waiting Temporary ToneHeadset Jack Ear Piece Volume AdjustmentExtension In Use Indication Set Ring Type Setup Mode OptionsSet Ring Volume Dial Type Selection Keyclick SelectionMaintenance Warranty HOW do I Send MY UNIT, in or OUT of WARRANTY?Technical Specifications Specifications are typical and may change without noticeTable of Contents Page Issue