VTech VT 1421 manual Getting Started

Page 11

GETTING STARTED

Setting up Your VT 1421

Choose an area near an electrical outlet and a telephone wall jack.

CAUTION

Use only CLASS 2 9V DC POWER SUPPLY included with your phone.

AC Power Adapter

Plug the AC power adapter into an electrical outlet and the DC connector to the back of the base unit.

To telephone

jack

To electrical

outlet

Charge the Battery

Charge the handset battery pack before use. The battery pack recharges automatically whenever the handset is in the base unit. The batteries must be charged for 16 hours before using your phone for the first time.

Handset Ringer

The handset ringer is programmed ON as the factory default. Refer to PROGRAMMING THE RINGER for more information.

Tone / Pulse Selection

To select the desired dialing mode, follow these steps:

1.Press the OK key to activate the menu. The following will be displayed :

2.Use the / keys until you see:

3.Press the OK key until you see:

4.Use the / keys to select the SET DIAL TYPE menu item:

11

Image 11
Contents Introduction Special Features Parts Checklist FCC Part FCC RegulationsHearing Aid Compatibility FCC Regulations Readandunderstandallinstructions Important Safety InstructionsImportant Safety Instructions Word about Rechargeable Batteries Battery PackCharging the Handset Battery Pack To Charge the Battery PackTo Replace the Handset Battery Pack Replacing a Drained Handset Battery Spare Battery ChargerInstallation Power Backup FunctionGetting Started If not, see in Case of Difficulty Connect Telephone Line CordWall Mounting Handset Layout Base Unit Layout Key / Handset locator Base Unit FeaturesOff Hook Stage Quick Reference GuideHandset Menu Operation On Hook Stage Ending a Call SetupMaking Calls Answering CallsDeleting Speed Dial Memory Dialing From MemoryCaller ID Using RedialReceiving And Storing Calls Caller IDCall Waiting Caller ID Type Word About Caller IDDigit Dialing Reviewing Caller ID MemoryDialing From Caller ID Memory Deleting Call ID Memory Special Message IndicatorsCaller ID Temporary Tone Advanced FunctionsCall Waiting Message WaitingHeadset Jack Ear Piece Volume AdjustmentExtension In Use Indication Set Ring Type Setup Mode OptionsSet Ring Volume Keyclick Selection Dial Type SelectionMaintenance HOW do I Send MY UNIT, in or OUT of WARRANTY? WarrantySpecifications are typical and may change without notice Technical SpecificationsTable of Contents Page Issue