Aurora Electronics PVI-3600-OUTD-UK-F-W

Installation and Operator’s Manual Page 11 of 63

(PVI-3600-OUTD-UK-F-W Rev.: 1.0)

The Aurora Wind Inverter is designed to accept only a single wind input. The

current of this input is limited to 20 Amperes.

Safety

Brake Wind Interface

Box

Diversion Load

Disconnect

Fig.3 Simplified diagram of a Wind system

Contents

Main AURORA Inverters INSTALLATION AND OPERATORS MANUAL Model number: PVI-3600-OUTD-UK-F-W Rev. 1.0 Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Fig. 10 General wiring diagram Page Page Page Page Page + - Page Page Page Page Page Page Page Page Page Installation and Operators Manual Page 39 of 63 (PVI-3600-OUTD-UK-F-W Rev.: 1.0) Error Type Description Page Page Page Page Page Installation and Operators Manual Page 45 of 63 (PVI-3600-OUTD-UK-F-W Rev.: 1.0) The sequence of the screens is summarized in the following figure: Exit from the regular cycle, Grid fail Page Page Page Page Page Page Page Page Page Page