Installation and Operator’s Manual Page 34 of 63
(PVI-3600-OUTD-UK-F-W Rev.: 1.0)
5.2 Available Data
AURORA provides two sets of data that are accessed using AURORA interface
software.
5.2.1 Real time data
The real time operating data can be transmitted on request over the communication
lines and is not recorded internally by the AURORA inverter. The AURORA
interface software can be used to retrieve and store data on a PC computer. The
following data is available:
Grid voltage
Grid current
Grid frequency
Power transferred to the grid
Voltage of IN1
Current of IN1
Voltage of IN2
Current of IN2
Heatsink temperature
Serial Number Part Number
Manufacturing week
Firmware revision code
Energy produced so far in the day
Leakage Current
5.2.2 Internally Logged Data
AURORA stores internally the following data:
Lifetime counter of grid connection time
Lifetime counter of energy transferred to the grid
Energy transferred to the grid every 10 seconds for the last 8640 periods of
10 seconds (which on average cover more than 2 days logged data)
Partial counter of grid connection time (the counter start time can be reset by
using the AURORA software)
Partial counter of energy (uses the same start time of the partial time counter)
Last 100 fault conditions with error code and time stamp
Last 100 variations to the grid connection parameters with parameter code,
new value.