Aurora Electronics PVI-3600-OUTD-UK-F-W - page 26

Installation and Operator’s Manual Page 26 of 63
(PVI-3600-OUTD-UK-F-W Rev.: 1.0)
The conduit and the wire lengths depend on the distance between the unit and Ac
disconnect and the Wind Interface Box. The wires must be inserted in the conduits
and routed to the terminal blocks. Pay careful attention in bending the cables
properly. The insulation at the end of the cable should be stripped back ½ “
(14mm). The maximum wire size that the terminal will accept is 10AWG.
WARNING: When making the electrical connections follow this exact
procedure to avoid exposure to dangerous voltages. Each step of the
procedure is explained in the following paragraphs.
To disconnect AURORA always open the breaker (AC and DC) prior to
do any further operation.