Installation and Operator’s Manual

Page 15 of 63

(PVI-3600-OUTD-UK-F-W Rev.: 1.0)

 

Control of the internal temperatures to automatically drive the speed of the external cooling fan. This will allow the inverter to deliver the maximum output power for ambient temperatures up +40 ° C .

The AURORA is designed for safe and reliable operation. This is made possible by the use of redundant control circuits.

2.5System Design:

The overall system design of a wind system is critical to successful operation and maximizing energy production.

Step 1:

The first step is determining the wind resource at a location is a site survey and possible wind monitoring.

Step 2:

The second step is purchasing a pre-designed wind system that includes the Aurora Wind inverter with a turbine specific power curve.

Awind turbine model specific power curve is pre-programmed into the Aurora Wind Inverter. The wind power curve is used by the Aurora Wind Maximum power point tracking algorithm to product the maximum amount of available energy.

Step 3:

The third step a proper installation of the entire wind energy system.

3 INSTALLATION

WARNING: The electrical installation of AURORA must be made in accordance with the electrical standards prescribed by the local regulations and the National electrical standards.

Page 15
Image 15
Aurora Electronics PVI-3600-OUTD-UK-F-W manual System Design, Installation