Cisco Systems manual Terminology Differences, Refer to Cisco Unified IP Phone 6901

Page 36

Chapter 1 An Overview of the Cisco Unified IP Phone

Terminology Differences

Table 1-9

Installation Checklist for the Cisco Unified IP Phone 6901 and 6911 (continued)

 

 

 

Task

Purpose

For More Information

 

 

 

4.

If you are configuring the network settings on the phone, you

See the “Configuring Startup Network

 

can set up an IP address for the phone by either using DHCP or

Settings” section on page 3-9.

 

manually entering an IP address.

See the “Configuring Settings on the Cisco

 

 

 

Using DHCP—Verify that DHCP is enabled with the IVR. You

Unified IP Phone” section on page 4-1.

 

can set an alternate TFTP by entering the IP address for the

 

 

TFTP when prompted by the IVR.

 

 

Note Consult with the network administrator to determine

 

 

whether you need to assign an alternative TFTP server

 

 

instead of using the TFTP server assigned by DHCP.

 

 

Without DHCP—Verify that DHCP is disabled with the IVR.

 

 

You must then configure the IP address, subnet mask, TFTP

 

 

server, and default router locally by using the phone’s IVR.

 

 

 

 

5.

Set up security on the phone.

See the “Configuring Security on the Cisco

 

Provides protection against data tampering threats and identity

Unified IP Phone” section on page 3-10.

 

theft of phones.

 

 

 

 

6.

Make calls with the Cisco Unified IP Phone.

Refer to Cisco Unified IP Phone 6901 and 6911

 

Verifies that the phone and features work correctly.

User Guide for more information.

 

 

 

 

 

7.

Provide information to end users about how to use their phones

See Appendix A, “Providing Information to

 

and how to configure their phone options.

Users Via a Website.”

 

Ensures that users have adequate information to successfully

 

 

use their Cisco Unified IP Phones.

 

 

 

 

Terminology Differences

Table 1-10highlights some of the important differences in terminology that is used in these documents:

Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 8.5 (SCCP)

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP)

Cisco Unified Communications Manager Administration Guide

Cisco Unified Communications Manager System Guide

Table 1-10 Terminology Differences

User Guide

Administration and System Guides

 

 

Auto Barge

cBarge

 

 

Message Indicators

Message Waiting Indicator (MWI) or

 

Message Waiting Lamp

 

 

Voicemail System

Voice Messaging System

 

 

 

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

1-24

OL-23874-01

Image 36
Contents Americas Headquarters Text Part Number OL-23874-01Page N T E N T S Manager Disabling and Enabling Web Page Access Network and Access Port Pinouts C-3 Installing the Bracket E-8 OL-23874-01 Overview AudienceOrganization Chapter DescriptionRelated Documentation Cisco Unified IP Phone 6900 SeriesCisco Product Security Overview Document Conventions Convention DescriptionItalic font Italic screen fontAn Overview of the Cisco Unified IP Phone Understanding the Cisco Unified IP Phone 6901 1shows the main components of the Cisco Unified IP PhoneOL-23874-01 2shows the main components of the Cisco Unified IP Phone OL-23874-01 Dynamic Host Configuration Protocol chapter What Networking Protocols are Used?Networking Protocol Purpose Usage Notes Communications Manager System GuideSupporting 802.1X Authentication on Cisco Unified IP Phones section on page 1-17forSee the LLDP-MED and Cisco Discovery Protocol 701/technologieswhitepaper0900aecd804cd46dCommunications Manager Security Guide Cisco Unified Communications ManagerSystem Guide Related TopicsFeature Overview Configuring Telephony FeaturesProviding Users with Feature Information Related TopicOL-23874-01 Refer to the Troubleshooting Guide for Cisco Unified Topic ReferenceCommunications Manager Security, refer to the Cisco Unified Communications ManagerOverview of Supported Security Features Feature DescriptionPhone section on page 3-10for more information IP Phones section on page 1-17for more information Voice Quality MetricsUnderstanding Security Profiles Establishing and Identifying Protected Calls Supporting 802.1X Authentication on Cisco Unified IP Phones OverviewRequired Network Components Best Practices-Requirements and Recommendations OL-23874-01 Purpose For More Information Communications Manager Administration Guide Communications Manager AdministrationChapter in the Cisco Unified Communications Manager Installing Cisco Unified IP Phones User Guide Administration and System Guides Terminology DifferencesRefer to Cisco Unified IP Phone 6901 A P T E R Cisco Communications Manager Administration Guide Providing Power to the Cisco Unified IP Phone Power Guidelines Power OutagePower Type Guidelines Understanding Phone Configuration Files Obtaining Additional Information About PowerUnderstanding the Phone Startup Process Purpose Related TopicsObtaining an IP Address Adding Phones with Auto-Registration Method Address?Adding Phones with Auto-Registration and Taps Adding Phones Using the BAT Phone Template ProcedureUsing Cisco Unified IP Phones with Different Protocols Converting a New Phone from Sccp to SIPDetermining the MAC Address for a Cisco Unified IP Phone Deploying a Phone in an Sccp and SIP EnvironmentBefore You Begin Network RequirementsCisco Unified Communications Manager Configuration Network and Access PortsHandset Speakerphone Cisco Unified IP Phone 6911 OnlyInstalling the Cisco Unified IP Phone See the Network and Access Ports section onCisco Unified IP Phone 6901 Cable Connections Cisco Unified IP Phone 6911 Cable Connections Footstand 3illustrates the footstand on the Cisco Unified IP PhoneHigher Viewing Angle Lower Viewing AngleConfiguring Startup Network Settings Mounting the Phone to the WallVerifying the Phone Startup Process Configuring Security on the Cisco Unified IP Phone Before You BeginConfiguring Settings on the Cisco Unified IP Phone Phone Settings OptionsOption Description Accessing the Phone Configuration Settings Accessing the IVR and Configuring Your Phone SettingAction IVR Code Navigating Notes OL-23874-01 Configuring Features, Templates, Services, and Users Feature Description Configuration Reference Features and Services Guide, BargeSystem Guide, Cisco Unified IP Phones Unified Communications ManagerFeatures and Services Guide Barge Unified Communications Manager FeaturesServices Guide Administration Guide, DirectoryForward Maximum Hop Count service parameter Manager Features and Services GuideFeatures and Services Guide,Barge Communications Manager FeaturesCodes and Forced Authorization Codes Point Configuration chapter in the CiscoConference Bridges chapter Number/Pattern Configuration chapter Administration Guide, Message WaitingConfiguration chapter System Guide, Voice Mail ConnectivityServices Guide, Monitoring Administration Guide, Cisco Unified IPPhone Configuration chapter Administration Guide, Time Period Administration Guide, Date/Time GroupAdministration Guide, Cisco Voice-Mail Adding Users to Cisco Unified Communications ManagerGiving Users Access to the User Options Web Pages Managing the User Options Web PagesUnified Communications Manager System Guide Click Save Selected/Changes Specifying Options that Appear on the User Options Web Pages OL-23874-01 Monitoring the Cisco Unified IP Phone Remotely Accessing the Web Page for a Phone Http//IPaddressDisabling and Enabling Web Page Access Device InformationNetwork Setup UDIDescription Vlan Network Statistics Table below Device Logs Status Messages Message Description Possible Explanation and ActionAdding Phones to the Cisco Unified Communi Cations Manager Database section onMessage Description Possible Explanation and Action Message Description Possible Explanation and Action Streaming Statistics Streaming Statistics Area Items Configuring Settings on the Cisco Unified IP Phone chapter OL-23874-01 Troubleshooting and Maintenance Resolving Startup ProblemsTroubleshooting and Maintenance Resolving Startup Problems Identifying Error Messages Cisco CallManager and Tftp Services Are Not Running Symptom Cisco Unified IP Phone Unable to Obtain IP Address Cisco Unified IP Phone Resets Unexpectedly Verifying Dhcp SettingsVerifying the Physical Connection Identifying Intermittent Network OutagesChecking Static IP Address Settings Verifying the Voice Vlan ConfigurationVerifying that the Phones Have Not Been Intentionally Reset Eliminating DNS or Other Connectivity ErrorsGeneral Troubleshooting Tips Checking Power ConnectionSummary Explanation Phone Configuration Settings section on page 4-2for details HalfduxcollisionexceedthresholdResetting or Restoring the Cisco Unified IP Phone Performing a Basic ResetPerforming a Factory Reset Performing a Basic Reset, Performing a Factory Reset,Using Voice Quality Metrics Monitoring the Voice Quality of CallsTroubleshooting Tips Metric Change ConditionWhere to Go for More Troubleshooting Information Cleaning the Cisco Unified IP PhoneOL-23874-01 Providing Information to Users Via a Website How Users Configure Phone Features How Users Access a Voice Messaging SystemSupporting International Users OL-23874-01 Physical and Operating Environment Specifications Specification Value or RangeCable Specifications Network and Access Port Pinouts Network Port ConnectorAccess Port Connector Pin Number FunctionOL-23874-01 Basic Phone Administration Steps Example User Information for These ProceduresProceed to Configuring the Phone section on page D-3 Adding a User From an External Ldap DirectoryConfiguring the Phone Proceed to the section Configuring the Phone, page D-3OL-23874-01 OL-23874-01 Performing Final End User Configuration Steps Click Device AssociationsClick Save OL-23874-01 Installing a Wall Mount for the Cisco Unified IP Phone Figure E-2 Preparing the Handset Hookswitch Before You BeginInstalling the Phone on Wall Mount Plate Network Port on the Phone RJ45 ConnectorFigure E-4 RJ45 Connector in the Wall Mount Jack Figure E-5 Mounting Holes Firmly slide the IP phone down into place Figure E-6 Phone bracket Installing the Bracket Figure E-8 Mounting the Wall Bracket Figure E-9 Attaching the Phone Bracket Figure E-10 Preparing the Handset Hookswitch Figure E-11 Attaching the Cables Figure E-12 Attaching the Phone to the Wall Bracket OL-23874-01 Cisco Unified IP Phone Non-Lockable Wall Mount ADA Non-Lockable Wall Mount Kit for 6900 SeriesComponents Package includes these itemsInstall Non-Lockable Wall Mount Kit for Phone Figure F-4 Mount the Wall Bracket Figure F-5 Attach Phone Bracket Remove Phone from Non-Lockable Wall Mount Proceed to Before You Begin, page E-2Figure F-7 Figure F-8 Features ProtocolProtocol Features Sccp SIP OL-23874-01 Numerics IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8
Related manuals
Manual 62 pages 9.7 Kb Manual 14 pages 29.4 Kb

6901 specifications

Cisco Systems 6901 is a versatile, compact, and powerful router designed to meet the networking needs of small to medium-sized businesses, as well as enterprise branch offices. This model is part of Cisco's ISR (Integrated Services Router) portfolio, which is known for its capability to integrate multiple services into a single platform, ensuring high efficiency and cost-effectiveness.

One of the main features of the Cisco 6901 is its ability to support advanced routing protocols, including RIP, EIGRP, OSPF, and BGP. This versatility allows for seamless integration into various network architectures, facilitating efficient communication and data transfer across multiple locations. The device is also built to handle high-bandwidth applications, making it an ideal choice for businesses that rely on robust network performance.

In terms of connectivity, Cisco 6901 offers multiple Ethernet ports, supporting both 10/100/1000 Mbps speeds. This ensures that users can connect a variety of devices, ranging from office computers to network printers, all while maintaining optimal network performance. Additionally, the router supports both LAN and WAN interfaces, providing flexibility in deployment options.

Security is a crucial aspect of networking, and the Cisco 6901 does not disappoint in this regard. It comes equipped with advanced security features, including firewall capabilities, intrusion prevention, and VPN support. These features ensure that sensitive business data is protected from unauthorized access, while also providing secure remote access for employees.

Another essential characteristic of the Cisco 6901 is its support for various multimedia applications. The router comes with Quality of Service (QoS) features that prioritize voice, video, and data traffic, ensuring high-quality performance for applications such as VoIP and video conferencing. This is particularly valuable in today's business landscape, where effective communication is critical for success.

The Cisco 6901 is also designed for ease of management and configuration. It features a user-friendly interface that simplifies the setup process, along with comprehensive monitoring tools that enable administrators to keep an eye on network performance and address any issues proactively.

In summary, the Cisco Systems 6901 is a powerful, feature-rich router that combines advanced routing capabilities with robust security measures and multimedia support. Its flexibility, ease of management, and comprehensive service integration make it an excellent choice for businesses seeking to enhance their networking infrastructure. With the Cisco 6901, organizations can achieve efficient communication, secure data exchange, and high-performance network operations, positioning themselves well for future growth.