Cisco Systems 3.0(10) manual Tapi 2.1 and Jtapi 1.2 Service Providers

New and Changed Information

•Cisco IP Phone 7940—This is a two-line Cisco IP Phone with the following features:

–Line buttons assignable as either lines or speed dials

–Pixel-based display

–Four soft keys with context-sensitive features

–Five fixed function buttons (Messages, Services, Information, Directory, Settings)

–Full-duplex speakerphone

–Message waiting indicator

–Dual 10/100 BaseT (RJ-45) connectors into dual port 10/100 BaseT switch

–Provision for either inline or local plug power

TAPI 2.1 and JTAPI 1.2 Service Providers

The Microsoft Telephony Application Programming Interface (TAPI) and Java Telephony API (JTAPI) service providers enable development of sophisticated, converged multimedia applications. These APIs support the following Cisco applications in this release:

•Cisco IP SoftPhone

•Cisco IP Contact Center

•Cisco IP Interactive Voice Response System

•Cisco IP Auto Attendant

•E-Services Application Engine

In addition, third-party software vendors may develop applications using these APIs. This release does not support Service Providers Interface redundancy.

Multicluster Scalability and ITU-T H.323 Enhancements

Cisco CallManager Release 3.0(5a) adds the following scalability and ITU-T H.323 enhancements for multicluster environment in which call admission control is provided by Cisco’s H.323 gatekeeper, the Cisco Multimedia Conference Manager (MCM):

	Release Notes for Cisco CallManager Release 3.0(10)
12	78-13493-02