Cisco Systems 3.0(10) manual Unknown

Documentation Updates

Table 9	Cisco CallManager Service Parameter Updates
ParamName		Values	Description
NumberingPlanInf		Default: 1	Gives some control over the ISDN
o			Numbering Plan Information field on the
			Called Party Number. This control that is
			available for H.323 calls and ISDN calls
			has the following characteristics:
			• If set to 0: disabled
			• If set to 1: a check determines what
			the ISDN Type of Number on the
			called party information element is.
			If the Type of Number is set to
			UNKNOWN, the Numbering Plan
			Information is also set to
			UNKNOWN.
			• If set to 2: The Numbering Plan
			Information is set to a PRIVATE
			PLAN, and the Type of Number is set
			to UNKNOWN.
ReorderRouteList		Default: F	Specifies when set to true that devices
			that have the same selection order in a
			route group, and are associated with a
			route list, are re-ordered when a call is
			placed using the associated route list.
StopRoutingOnOu		Default: F	Specifies when set to true, that if a call
tOfBandwidthFlag			being routed through a route list detects
			the associated “cause” during the release
			of the call, no re-routing to the next
			device in the route list is attempted and
			the call is released with the associated
			cause.

	Release Notes for Cisco CallManager Release 3.0(10)
88	78-13493-02