Cisco Systems 3.0(10) manual Summary Explanation

Resolved Caveats

Table 2	Cisco CallManager Release 3.0(10) Resolved Caveats (continued)
DDTS Number		Summary	Explanation
CSCdu04286		After conferencing, if only two parties	A Cisco CallManager code change corrects
		are left in the conference, TAPI redirect	this behavior.
		causes both parties to be dropped
		instead of just the one doing the
		redirect.
CSCdu05420		Locations bandwidth takes more than	Although this problem could not be exactly
		20 hours to free up.	reproduced, from the provided trace we
			gather that a problem with media occurs
			when media are being set up and then torn
			down before completing the set up.
CSCdu05485		Sending out 3.1 kHz causes problems	A Cisco CallManager code change corrects
		for some calls. This occurs when using	this behavior.
		the Cisco Catalyst 6000 E1.
CSCdu06291		Cisco IP phone accepts only one default	Cisco IP Phone 7960 now accepts
		router from Unix Dynamic Host	additional routers.
		configuration Protocol (DHCP) server.
CSCdu07051		Cisco CallManager users can have a	The software now accepts an underscore in
		user ID with an underscore, but they	the user ID.
		cannot log in to CCMUser page with a
		login name with an underscore.
CSCdu08613		Cisco uOne port hangs after transfer to	Cisco CallManager now sends an onhook
		a device where call forward all and/or	signal when the device uses call forward all
		call forward back fails.	and/or call forward back to an unreachable
			directory number.
CSCdu09807		H.323 endpoint always uses display	A code change allows for the H.323
		name of the first line.	gateway to operate differently.
CSCdu09917		A need exists for a user to be able to	The AnonymousDevice protocol can be
		change AnonymousDevice protocol to	changed to H.225.
		H.225.

	Release Notes for Cisco CallManager Release 3.0(10)
28	78-13493-02