Cisco Systems 3.0(10) manual New Service Parameters, ParamName Values Description

Documentation Updates

New Service Parameters

Table 9 contains new Cisco CallManager service parameters, with descriptions, that were not included in the Release 3.0(5) Cisco CallManager Administration Guide or the online help for the Cisco CallManager application.

Table 9 Cisco CallManager Service Parameter Updates

ParamName	Values	Description
CcmPriorityClass	Default: 0	CcmPriorityClass = 0:
		Cisco CallManager process runs in
		normal priority class.
		CcmPriorityClass = 1:
		Cisco CallManager process switches
		between normal and high priority class
		every second.
		CcmPriorityClass = 2:
		Cisco CallManager process runs in high
		priority class.
CTINewCallAcce	Default: 4 (seconds)	Specifies timeout interval. Timer ensures
ptTimeout		that, for calls made into CTI ports and
		CTI route points, the calls are not
		suspended, so that callers hear only
		silence; if the CTI application controlling
		the CTI ports/route points does not
		handle the call.
		After the Cisco CallManager notifies the
		application (using JTAPI/TAPI) of an
		incoming call at a CTI port or CTI route
		point, the Cisco CallManager waits for a
		configurable time for the application to
		handle the call (as in accept, answer,
		redirect, or disconnect). If the application
		does not respond within the set time,
		Cisco CallManager forwards the call to
		the call forward busy number configured
		for the CTI port or CTI route point. If no
		call forward busy is configured, caller
		receives a fast busy tone.
		Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02			83