Cisco Systems 3.0(10) manual Summary Explanation

			Resolved Caveats
Table 3	Cisco CallManager Release 3.0(9) Resolved Caveats (continued)
DDTS Number		Summary	Explanation
CSCdt44128		6608 sends disconnect when it does not	A Cisco CallManager service parameter
		receive an alerting fast enough.	was extended to correct this behavior.
CSCdt48748		When Windows 2000 Administrator	After upgrading to Cisco CallManager
		account name is changed, i.e., to	3.0(9), the customer no longer experienced
		"callmngradmin,” the installation	this problem.
		reports an error changing the admin
		password.
CSCdt49457		STI backup may fail with large	A newly created backup prevents this
		database.	behavior.
CSCdt51159		Resetting h.225 device by any means	A Cisco CallManager code change corrects
		causes AnonymousDevice failure.	this behavior.
CSCdt51281		ISDN layer3 stack on PRI-EURO	A Cisco CallManager code change corrects
		response to INFOR in state U4	this behavior.
CSCdt52273		MeetMe conference button does not	A new timer corrects this problem.
		reset T302 timer.
CSCdt52506		CDR database will not be restored.	When backing up Cisco CallManager
			databases larger than 2 GB to a local or
			network drive, the file is clipped while
			being added to the TAR file.
			The backup software was fixed to get rid of
			a 2 GB limitation.
CSCdt53123		Cisco CallManager does not register	A button now exists to reset the gateway.
		with gatekeeper until the
		Cisco CallManager is stopped and
		started.
CSCdt53834		Cisco Catalyst 6000 8 Port Voice E1/T1	The code that caused this caveat only
		and Services Module does not support	checked for G711 muLaw. The code now
		G711Alaw.	checks for G711ALaw.
CSCdt54279		Change of zone name in Gatekeeper	The code now changes the gatekeeper zone,
		device requires the administrator to stop	and the administrator uses the Reset
		and start the Cisco CallManager.	Gatekeeper button to reset gatekeeper.

	Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02		37