Cisco Systems 3.0(10) manual ParamName Description

Documentation Updates

Table 11	CMI Service Parameters Not Included in Release 3.0 Documentation
ParamName		Description
BackupCallManagerName		This parameter defines the names of the Cisco CallManagers that are
		going to be used for the CMI backup. You can use either the name of
		a Cisco CallManager or its IP address.
BaudRate		Cisco CMI connects to the voice mail system via an ETA/TIA-232
		connection. This parameter defines that connection.
		Recommended default value: 9600
			Note	Many voice mail systems can be
				configured to use different baud
				rates, but the one shown here
				will frequently be correct.
CallManagerName		This parameter defines the names of the Cisco CallManagers that are
		going to be used for the CMI primary. You can use either the name
		of a Cisco CallManager or its IP address.
DataBits		CMI connects to the voice mail system via an ETA/TIA-232
		connection. This parameter defines that connection.
		Recommended default value: 7
DialingPlan		This parameter is one of four that are required by CMI to register an
		intercept for the voice mail system with which CMI is going to work.
			Note	Small systems without a
				complex dialing plan usually
				only need the VoiceMailDn
				parameter. The remaining
				parameters, DialingPlan,
				RouteFilter, and
				VoiceMailPartition, will default
				to empty strings.

	Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02		91