Documentation Updates
Running Show Tech
To run show tech correctly, use this example to construct your command:
show
The example given in the Show Command chapter of Configuring Remote Serviceability for Cisco CallManager 3.0 (page
Changes
This section contains changes that have occurred since the original release of the Cisco CallManager Administration Guide Release 3.0. These changes do not currently appear in the Release 3.0 Cisco CallManager Administration Guide or the online help for the Cisco CallManager application.
Default Value Changed for SdlTraceTotalNumFiles Service Parameter
SdlTraceTotalNumFiles is a service parameter for the Cisco CallManager service type. The default has been changed to 250. This is the correct default for this service parameter.
Omissions
This section contains lists of service parameters for the Cisco CallManager that were not included in the initial production of the Release 3.0 Cisco CallManager Administration Guide and online help for the Cisco CallManager application. A later release of the document will define these parameters.
Caution Do not modify any of the defaults or settings of the following parameters without the assistance of the Cisco Technical Assistance Center (TAC).
| Release Notes for Cisco CallManager Release 3.0(10) |
96 |