Cisco Systems 3.0(10) manual Ddts number Description

Open Caveats

		Table 8	Open Caveats for Cisco CallManager Release 3.0(10) (continued)
DDTS number		Description
CSCdt73926		CDR CallID is reset with Cisco CallManager restart.
		Workaround: If Cisco CallManager must be restarted, extract CDRs before
		restarting Cisco CallManager. Otherwise, relate records will need to be determined
		by examination of the time and date of the record.
CSCdt76403		CDR records are incorrect when recording conference calls.
		Workaround: No workaround exists.
CSCdt86164		Cisco Access Digital Trunk Gateway DT-24+ power cycle causes a call to fail.
		Workaround: Reset the Cisco Access Digital Trunk Gateway DT-24+ device.
CSCdt87371		Transfer fails after system is online for a couple of days.
		Workaround: Reboot system.
CSCdt91509		A need exists for the dialing digits to exceed 24.
		Workaround: Decrease the number of digits in the route pattern, so the dialed digits
		equal less than 24.
CSCdt94640		Cisco CallManager Release 3.0(8) does not permit the configuration of any ports of
		slot 6 of a 3660 router configured for Media Gateway Control Protocol (MGCP) if
		ports of another slot have been configured.
		Workaround: No workaround exists.
CSCdt95739		Caller ID overwrites a call-parked number.
		Workaround: No workaround exists.
CSCdt95871		Display IE (callerid) calling party number is appended to name.
		Workaround: No workaround exists.
CSCdu01040		With G729 codec, Unity never detects silence.
		Workaround: No workaround exists.
CSCdu01246		Dial tone persists even after key is entered on Cisco IP SoftPhone.
		Workaround: Use 9.!# pattern.
CSCdu04443		Cisco CallManager fails to respond to Simple Network Management Protocol
		(SNMP) query of ccmGlobalInfo.
		Workaround: No workaround exists.
	Release Notes for Cisco CallManager Release 3.0(10)
78			78-13493-02