Cisco Systems DVC-1000 manual Frequently Asked Question

Page 48

Frequently Asked Question (continued)

6

7

How large will the image be?

As large as the TV screen. i2eye supports three screen formats. The first is a picture-in-picture mode that has the incoming video covering about half the television screen and the outbound video in a smaller window. The second is full screen mode. This mode displays the incom- ing video across the entire television screen. The third is connection status mode. This mode displays the picture-in-picture mode and gives

you an idea of the upload and download speed.

Can I use the DVC-1000 with a non-D-Link directory service?

No. The DVC-1000 is designed to automatically connect to the D-Link Directory Service. This is a free service and is available to anyone with a DVC-1000. The Directory Service allows for calling another DVC-1000

Videophone by using a phone number instead of using an IP Address.

8

9

10

Do I need a PC to use i2eye?

i2eye is a complete standalone system that handles all the communications, so you don’t need a PC. Just connect it to the TV and broadband connection and go. You can also use it with any PC with video input capabilities.

Can I connect i2eye without wires?

Yes, there is an optional DWL-810+ device that allows you to configure your complete system without wires (note: you need a wireless router or access point). The DWL-810+ bridges from i2eye’s wired Ethernet connection to the AirPlus wireless router or access point that is connected to the cable or DSL

modem.

How easy is i2eye to setup?

Very easy. When users first turn on i2eye they will be walked through a Set-up Wizard that is designed to get the videophone up and working quickly. The wizard asks for the information needed to connect to a broadband Internet connection. Once the information is sent, i2eye will connect to the D-Link i2eye server. The server will assign a 10-digit

“Internet telephone number” to the device. It will not be necessary to work with cumbersome IP addresses when you want to communicate

using the i2eye.

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents I2 eyeTM Contents Introduction Package Contents System RequirementsFeatures & Benefits ConnectionsLEDs LEDUsing the Remote Control Getting StartedRemote Control Layout Speakerphone Mode Adjust ContrastUsing the On-Screen Keyboard Using the Setup Wizard Welcome ScreenPersonal Information Screen Using the Setup Wizard Obtain an IP Address automatically DefaultNetwork Address Screen IP Address, Subnet mask, GatewayDNS Domain Naming System Screen Network Speed ScreenUsing a Telephone with the DVC-1000 System RestartUsing the DVC-1000 Status IconsUsing the DVC-1000 Privacy Status IconsAnswering an Incoming VideoPhone call Audio Video Do Not DisturbPlacing a Manual Dial VideoPhone Call Using the Remote Speakerphone Mode Using the DVC Entering Phone NumbersEntering IP Addresses Using the Configuration Menu SettingsMain Screen DialUsing the Configuration Menu Main Screen DialSpeed Dial List Manual DialAdd Remove Edit CloseDefault View Main Screen ViewFull Screen View Display ConnectionMain Screen Settings UpdateGeneral Personal Information Network Main Screen Settings General Turn on video privacy when answering callsAlways answer incoming calls Main Screen Settings Personal Information NameMain Screen Settings Network AddressPublic IP Speed Main Screen Settings Network Address IP Address Subnet mask GatewayMain Screen Settings Network DNS Primary DNS Secondary DNSMain Screen Settings Network Public IP Address Use Private IP Address Specify public IP Public IP addressMain Screen Settings Network Network Speed Main Screen Settings Update Main Screen Privacy Audio PrivacyVideo Privacy Do not Disturb Upgrades Opening Ports on Your Routers and Gateways How to open ports on a router Click EnabledUnder Private Port and Public Port , enter Opening Ports on Your Routers and Gateways Network With Multiple Public IP Addresses Broadband Modem and One PCBroadband Modem, Multiple PCs and a Hub Broadband Modem, Multiple PCs and a RouterBroadband Modem Only Troubleshooting Cannot make a call using a phone numberError Message displays on main screen Cannot make direct IP callsTroubleshooting Telephone doesn’t ring with an incoming callVideoPhone freezes-up while answering a call No video in a call Poor video in a callVideo freezes during a call No audio in callExcessive delay during a conversation Audio stops during a callAudio has a echo Error Displays on main screen Public IP button is not enabledVideoPhone cannot obtain IP Address automatically VideoPhone reports packet lossIncorrect Network Speeds VideoPhone does not boot up Video is not being displayed on televisionFrequently Asked Questions What is D-Link´s i2eye?What is the D-Link Ldap Directory Service? Frequently Asked Question What devices can I connect to with the DVC-1000? What standards drive i2eye?Do I have to take every call? Glossary of Terms Glossary of Terms Between network devices over a network Technical Specifications Technical Specifications Contacting Technical Support Technical SupportWarranty and Registration Statutory 02/28/2003

DVC-1000 specifications

The Cisco Systems DVC-1000 is a versatile device designed to enhance audio and video surveillance capabilities in security and monitoring applications. As part of Cisco's line of digital video conferencing and surveillance solutions, the DVC-1000 provides a blend of advanced technology and user-centric features that make it a valuable asset for both enterprise and government sectors.

One of the main characteristics of the DVC-1000 is its high-definition video capabilities. It supports various resolutions, providing clear and detailed footage that is crucial for identifying subjects in security scenarios. The device is equipped with advanced compression technology, enabling it to manage bandwidth effectively without compromising video quality. This makes it an ideal solution for environments where bandwidth may be limited or where multiple cameras are in use.

The DVC-1000 is also characterized by its scalability. It can seamlessly integrate with existing Cisco video surveillance systems or work independently, thereby fitting into a wide range of infrastructures. Its compatibility with both analog and IP-based cameras provides flexibility to users, allowing them to tailor their surveillance solutions according to their specific needs.

Another significant feature is the DVC-1000's robust security protocols. The device employs end-to-end encryption, ensuring that the video streams are safeguarded against unauthorized access. Additionally, it supports various authentication methods, allowing organizations to control user access and maintain high levels of security across their networks.

In terms of management, the DVC-1000 offers user-friendly interfaces and supports various management software platforms, making it simple for administrators to set up, monitor, and maintain their video surveillance systems. Its remote management capabilities allow users to access the device from different locations, facilitating real-time monitoring and maintenance.

Finally, Cisco's commitment to quality and reliability is reflected in the DVC-1000's durable design. Built to withstand a range of environmental conditions, the device ensures consistent performance, making it suitable for both indoor and outdoor installations.

In conclusion, the Cisco Systems DVC-1000 is a feature-rich device that combines high-definition video capabilities, security, scalability, and ease of management, making it an excellent choice for organizations looking to enhance their surveillance and video conferencing systems. Its advanced technologies and robust design ensure reliability and effectiveness in a wide array of applications.
Top Page Image Contents