AT&T TL9228, TL9278 user manual Base ringer, Remote access code

Answering system

Answering system setup

Base ringer

You can set the volume to high or low, or turn the base ringer off. Unless you change it, the telephone base ringer volume is set to low.

To change the setting:

1.Press SETUP twice. The system will announce “Base ringer,” followed by the current setting, and then “To change the setting, press SKIP or REPEAT; to continue setup, press SETUP.”

2.Press SKIP or REPEAT to choose among off, low or high.

3.Press SETUP to save your selection and move to the next menu option.

-OR-

Press PLAY/STOP to save your selection and exit the menu.

Remote access code

To access your answering system remotely from any touch tone phone, you need to enter a two- digit number (10-99). Unless you change it, the remote access code is 19.

To change the remote access code:

1.Press SETUP three times. The system will announce "Remote access code," followed by the current setting, and then "To change the setting, press SKIP or REPEAT; to continue setup, press SETUP."

2.Press SKIP or REPEAT to adjust the remote access code number by one. Press and hold SKIP or REPEAT to adjust the remote access code number by 10.

3.Press SETUP to save your selection and move to the next menu option.

-OR-

Press PLAY/STOP to save your selection and exit the menu.

62