AT&T E2811 user manual Tabletop mounting

Getting started

Installation options

3. To attach the bracket for wall mounting,
insert the tabs of the bracket into slots
and	on the telephone base, then press
the other bracket tabs into slots		and
as shown on the right.
4. Plug the power adapter into an electrical
outlet not controlled by a wall switch. Plug
the telephone line cord into a telephone
wall jack. To mount the telephone on the
wall, position the mounting holes		and
over the telephone outlet mounting studs.
Press and slide the bracket down firmly			Telephone outlet mounting studs
so the telephone is held securely on the
telephone outlet mounting studs.

Tabletop mounting

To return the bracket from the wall mount to tabletop position, follow the directions below.

1. Remove the telephone base from the wall. 2. Insert the bracket tabs into slots

Unplug the cords from the wall jacks.	and on the telephone base,
Remove the bracket from the telephone	then press the other bracket
base.	tabs into slots and .

3. Route cords through slots. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end of the power adapter into an electrical outlet not controlled by a wall switch.