AT&T E2811 user manual Last number redial, Temporary ring silencing, Handset locator

REDIAL

555-1234

RINGER MUTE

�

Telephone operation

Basic operation

Last number redial

Press REDIAL/PAUSE to display the most recently dialed numbers (up to 32 digits). Press CID/-VOLUME or DIR /VOLUME+ repeatedly to view up to five recently called numbers. The handset beeps twice at the beginning or end of the list. Press OFF/CLEAR to exit. Press PHONE/FLASH or SPEAKER to redial any displayed number. Or press PHONE/FLASH then REDIAL/PAUSE to dial the most recently dialed number (up to 32 digits).

Press DELETE to delete the displayed number from the redial memory.

Temporary ring silencing

Press OFF/CLEAR or MUTE while the telephone is ringing to silence the ringer temporarily. This will silence the ringer without disconnecting the call.

The next incoming call will ring normally.

Handset locator

If the handset is misplaced, press HANDSET LOCATOR on the telephone base. The handset will play a paging tone for 60 seconds to help you locate the handset. To stop the paging tone, press PHONE/FLASH, SPEAKER, or any dial pad key (0-9, *, or #) on the handset, or press HANDSET LOCATOR on the telephone base.

NOTES:

1.If the handset ringer is set to off (0), that handset will not generate paging tone.

2.During a page, if you press OFF/CLEAR or MUTE on the handset (see this page above), the ringer of the handset will be silenced, but it will not cancel the page.

12