AT&T 1465 user manual Speed dialing, To enter a Speed Dial number, To call a Speed Dial number

91-5624-40-00-ATT1465CIB.qxd 5/20/2004 4:08 PM Page 16

1 PROG

DIRECTORY

2^

SPEED DIAL

3 SELECT

ENTER 1-9

ENTER NAME

01

(See Steps 3-7 on next page.)

Directory Dialing

Speed dialing

Numbers called most frequently can be stored in memory locations 1-9 and dialed with only two button presses.

You can enter 9 Speed Dial numbers up to 24 digits long. Each number is stored in a one-digit memory location (1-9).

To enter a Speed Dial number

1Press PROG to begin programming.

2Press ^ to display SPEED DIAL.

3Press SELECT.

4Press dial pad to choose memory location (1-9).

5Enter a name (up to 15 characters), then press

SELECT.

6Enter a telephone number (up to 24 digits), then press SELECT.

7Choose distinctive ringing (yes or no).

8Press PROG or SELECT to store the number. You will hear a confirmation tone.

To call a Speed Dial number

To use speed dialing, press and hold a dial pad button (1-9) to display the number and name stored in that speed-dial location, then press PHONE to dial the number.

NOTE: To view another Speed Dial number, Press" OFF ". Follow the instruction" To call a Speed Dial Number " to display another Speed Dial number.

To change or delete a Speed Dial number

Press and hold a dial pad button (1-9) to display the entry you want. Press SELECT, then press ^until the option you want is displayed (see page 19).

16