Telephone operation
Options while on calls
Temporary tone dialing
If you have pulse (rotary) dialing service only, use this feature to temporarily switch from pulse to
1. During a call, press TONE. Buttons pressed after this
send
3. The telephone automatically returns to pulse dial mode after you end the call.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the directory, caller ID history or redial list. Doing this can be useful if you need to access numbers other than telephone numbers (such as bank account numbers or access codes).
•To access the directory while on a call:
1.Press MENU/SELECT.
2.Press DIR or CID to scroll to >DIRECTORY, then press
MENU/SELECT.
3.Press DIR or CID to scroll or press the dial pad keys (0 through 9) to find the desired entry (see
To search by name on page 26).
4.Press MENU/SELECT. The telephone automatically dials the displayed number.
•To access the caller ID history while on a call:
1.Press MENU/SELECT.
2.Press DIR or CID to scroll to >CALL LOG, then press
MENU/SELECT.
3.Press DIR or CID to scroll to the desired entry. To view the dialing options, press # (see To view the dialing options on page 34).
4.Press MENU/SELECT. The telephone automatically dials the displayed number.
PHONE 0:01:30
10:30PM 11/20
>DIRECTORY CALL LOG
Charlie Johnson
ROBERT BROWN
8:30PM 11/20
20