AT&T 2256 user manual Batteries, Battery Life, Charge the Handset Battery Pack

Page 55

BATTERIES

Battery Life

Battery life depends on how far the handset is from the base,and other environmental conditions.

¥NOTE: For optimum performance, charge your handset on the base every night.

Charge the Handset Battery Pack

This battery should remain charged for up to three days. A fully charged battery provides an average talk time of about seven hours.

The battery pack needs charging when:

The battery icon ( ) flashes,

A warning tone sounds,or

The screen displays when idle.

Place the handset in the base so the CHARGING light goes on. The battery pack is typically charged in eight hours. For best results,the initial charge should be 12 hours.

You can keep the battery fully charged by returning the handset to the base after each use.

If you repeatedly get a low battery indicator, even after eight hours of charging,the battery should be replaced. Use only AT&T Battery 3301,SKU# 91076.

CAUTION: Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the User’s Manual, Part 1.

52

Image 55
Contents Part 1 Important Product Information With Caller ID/Call WaitingPage Contents Before YOU Begin Parts ListAbout the Call Log About Caller Identification Caller IDConnect the power cord InstallationCharging Stand Installation Table/Desk InstallationCharge the handset battery Install the handset batteryCheck for dial tone Headset Belt ClipWall Installation Feature Setup Menu Telephone Feature SetupRing Volume Ring Pattern Key Click Steps Handset NameLanguage Setting Clear Message Waiting Set Dial Method Make a Call Handset VolumeTelephone Operation Idle ScreenSpeakerphone Call TimerFlash/Call Waiting RedialMute Temporary Tone Dialing Page/Handset LocatorScreen Displays When Display Screen MessagesThis Icon Indicates Display Screen IconsLight Status Indicates Base LightsTwo double beeps Tones and What They MeanThree quick beeps One double beepIntercom Calls Intercom OperationTransfer a Call Answer an Incoming Call While on an Intercom CallForward a Call Conference Calling Store a Number and Name in Phone Book PhonebookDial Page Dial a Number in Phone Book Edit a Number/Name in Phone Book Page Delete a Number/Name from Phone Book Page Caller ID Operation Review Call Log Removing a Specific Call Record Remove Call RecordsRemove All Call Records Store a Call Record in Phone Book Dialing Options Display DialSet the Clock Audible IndicatorsAnswering System Operation AT the Base Turn Answering System On or OffAbout Announcements About MailboxesTo review your announcement at any time Record Your AnnouncementAnswering System Feature Setup Change base ringer Feature SummaryChange message alert Change announce onlyListen to Messages Delete Messages Adjust Playback VolumeRecord a Memo Window Displays To Indicate Message Window DisplayVoice Menu Remote AccessRemote Access Commands Connect with the Answering SystemTurn system off End remote access callRecord announcement Record memoCharge the Handset Battery Pack Battery LifeBatteries Replace the Handset Battery Pack If you have Case of DifficultyTelephone Operation If the phone does not work at all, check these items firstIf the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf the caller’s name or phone number is not displayed Caller IDIf your telephone MisdialsIf messages are Answering SystemIncomplete Message window If appearsAnnouncement isn’t If your outgoingClear Number of Rings Default SettingsDefault Settings Announce OnlyTechnical Specifications Technical SpecificationsIndex NEW