Getting started
Wall mounting
The base can be installed on any standard wall phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, computer rout- ers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
1)Connect telephone line cord and power adapter to telephone jacks and wall jacks, respectively, as shown on page 7.
2)Install wall mount bracket onto set. First put the two front wall mount bracket tabs into the front notches
on bottom of telephone base, then squeeze the rear tabs of the wall mount bracket as you insert them into the rear notches on the bottom of the telephone base.
Plug power adapter into an electrical outlet not controlled by a wall switch.
3) Position the wall mount brack- et over the wall outlet mount- ing pegs, and press and slide the wall mount bracket down firmly so it is held securely on the outlet mounting pegs.
Plug telephone line
cord into the telephone jack.