AT&T E5933B, E5934B user manual Handset settings, Ringer volume, Ringer tone, Key tone

>DIRECTORY CALL LOG

RINGER VOLUME

RINGER TONE 1

KEY TONE

ON

Telephone operation

Highlighted menu item

Handset settings

Using the feature menu you can change settings to customize how the telephone works.

Press MENU, then use the V^buttons to scroll to the feature you want to change. As you scroll through the menu, the top menu item is always highlighted with a > symbol. Press SELECT to select the highlighted item.

Press OFF at any time to cancel an operation, back up to the previous menu, or exit the menu display.

Ringer volume

Using this menu you can set a ring volume level (1-6), or turn the ringer off (0). Use the V^buttons to hear a sample of each volume level, then press SELECT to select the one you prefer.

— OR —

When the handset is in idle mode, press VOLUME ^Vbuttons on the right side of the handset to change ringer volume directly.

NOTE: The ringer volume level also determines the levels of ringing for intercom calls (see page 15) and the paging tone when initiating the

Handset Locator feature (see page 12). If the handset ringer volume level is set to off (0), that handset is silenced for all calls and paging.

Ringer tone

This feature allows you to choose one of 10 ringing tones. Use the V^buttons to hear a sample of each ringer tone, then press SELECT to select the one you prefer.

Key tone

The handset is factory programmed to beep at each key press. Use the V^buttons to select ON or OFF, then press SELECT to save your preference.

NOTE: If you select OFF, you will not hear the beep tone when you press keys.

18