Getting started
Battery installation & charging
After battery installation, place each handset in the telephone base or a charger and allow to charge for 16 hours before use. You can keep the battery packs charged by returning the handsets to the telephone base or chargers after each use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about eight hours depending on environmental conditions, standby time is approximately four days.
Press in and downward on the tab to open the battery compartment cover.
Plug power adapter into the jack on the underside of charger as shown, then plug into electrical
Plug the battery | Place the battery |
pack connector | pack and wires in |
into handset. | the compartment. |
| Place handset in base or |
| charger to charge for 16 |
| hours before first use. |
Slide battery compartment cover up until it clicks closed.
outlet.
LOW BATTERY
Low battery indicator Return handset to base or charger to recharge when this symbol flashes. (Handset will beep when battery is low.)
Caution: Use only supplied rechargeable battery or replacement battery pack (part number
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1 (800)