Appendix
Troubleshooting
CONNECTING...
displays on my cordless handset
•Ensure that the telephone base is powered up.
•Place the cordless handset in telephone base for one minute to allow the cordless handset and telephone base to resynchronize channels.
•Move the cordless handset closer to the base. You might have moved out of range.
•If the cordless handset is in its base and the charging light does not come on, refer to The char�ge light� is off section in this Tr�oubleshoot�ing guide.
•Reset the telephone base. Unplug the unit’s electri- cal power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.
•Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, page, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless phones.
The batteries will not hold a charge
•Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to its base when not in use.
•You may need to purchase a new battery, please refer to the Batt��er�y section of this user’s manual.
•Your phone might be malfunctioning. Please refer to the Limit�ed warr��ant�y section of this user’s manual for further instruction.
•If the cordless handset is in its charger and the charging light does not come on, refer to The char�ge light� is off in this Tr�oubleshoot�ing guide.
44