AT&T E5903B, E5921, E5902B user manual Charge light

Page 52

Appendix

Troubleshooting

Common cure for electronic equip- ment

If the unit does not seem to be responding normally, try putting the cordless handset in its base. If it does not seem to respond, do the following (in the order listed):

Disconnect the power to the telephone base.

Disconnect the cordless handset battery, and spare battery, if applicable.

Wait a few minutes.

Connect power to the telephone base.

Re-install the battery pack, and place the cordless handset into the telephone base.

Wait for the cordless handset to re-establish its con- nection with the telephone base. To be safe, allow up to one minute for this to take place.

The charge light

• Clean the cordless handset and telephone base

is off

charging contacts each month using a pencil eraser

 

or cloth.

 

• Make sure the power and line cords are plugged in

 

correctly and securely.

 

• Unplug the unit’s electrical power. Wait for 15 sec-

 

onds, then plug it back in. Allow up to one minute for

 

the cordless handset and telephone base to reset.

 

• Your phone might be malfunctioning. Please refer to

 

the Limited warr��anty section of this user’s manual

 

for further instruction.

49

Image 52
Contents E598-2 Congratulations Table of contents StopQuick reference guide HandsetFeature menu Using menusParts checklist Quick start guide User’s manualBattery installation & charging LOW BatteryInstall belt clip as shown below if desired Belt clip & optional headsetAdding and registering handsets To register a handset to your telephone base Replacing a handset To de-registerall handsetsBasic operation Making and answering callsOn-hook dialing Auto offLast number redial Handset locatorVolume control Options while on callsCall waiting Multiple handset useTemporary ring silencing MuteTemporary tone dialing Directory accessing Last number redial accessingCaller ID log accessing Intercom Handling incoming calls Intercom call transfer Transfer toSettings LanguageClock setting Dial typePress MENU/SELECT Clear voice mail indicationVoicemail light Sounds Ringer melodyKey tone ToneDisplay WallpaperContrast Ringer volume Directory Shared directoryMemory capacity Exiting the directoryNew directory entries To create and store a new directory entryDirectory Directory search To search by nameDirectory search To dial a displayed number To dial, delete or change entriesTo delete an entry To change an entry Caller ID  Information about caller ID with call waitingShared caller ID log How caller ID worksCaller ID Memory matchMissed calls To review the call log To review the call logOther options Screen icons, indicator lights & tones Indicator lightsScreen icons & alert tones Handset alert tonesHandset display screen messages Screen display messagesPlace Troubleshooting My phone doesn’t work at allCannot dial out Connecting Troubleshooting While using my Troubleshooting My caller ID isn’t Charge light Safety information Important safety instructionsDo not use a telephone in the vicinity of a gas leak Important safety instructions Battery for locations accepting spent nickel-metal Batteries Pacemaker patients Especially about telephones answering systemsFCC Part 68 and Acta FCC Part 68 and Acta FCC Part Reorient or relocate the receiving antennaLimited warranty Limited warranty Limited warranty Limited warranty Technical specifications 9VDCIndex Index 91-001110-010-100