Motorola CLP series, CLP1040, CLP1010 manual Charging with the Drop-in Tray Single Unit Charger SUC

Page 22

BATTERY AND CHARGER FEATURES

Charging with the Drop-in Tray

Single Unit Charger (SUC)

1.Place the drop-in tray charger on a flat surface.

2.Insert the connector of the power supply into the Micro USB port on the front of the drop-in tray charger.

3.Connect the correct power supply to a proper AC outlet.

4.Insert the radio into the tray, making sure the charging contacts on the charger are aligned with the contacts on the radio.

Note: When charging a battery attached to a radio, turn the radio OFF to ensure a full charge. The radio will fit in the charger with the holster attached when placed face down in the tray.

Charging with the Drop-In Tray

Multi-Unit Charger (Optional

Accessory)

The Multi-Unit Charger (MUC) allows drop-in charging of up to 6 radios. Each of the 6 charging pockets can hold a radio (with battery installed). The Multi-Unit Charger provides pockets for headset storage.

1.Place the charger on a flat surface or mount it on the wall.

2.Insert the power cord plug into the jack on the MUC.

3.Plug the cord into an AC outlet and then into charger.

4.Turn the radio OFF.

14

Image 22

Contents Page Document Copyrights DisclaimerContents Programming the Radio Through CPS Batteries and Chargers Safety InformationRadio Frequency Code Charts Motorola Limited Warranty Radio CloningComputer Software Copyrights Radio Frequency RF Exposure Safety Standards Product Safety and RF Exposure ComplianceFCC Licensing Information FCC Licensing Information Introduction Radio Overview Getting Started Install the Battery Connecting an Audio Accessory Installing and Removing the Swivel Belt Clip Holster Adjusting the VolumeTurning the Radio On and Off Transmitting and Receiving Talk RangeOperation with Menu Settings HOW to StepDefault Channel Settings for CPS Selecting a ChannelFor CLP1010 single-channel models Sending Call Tone enabled through CPSMonitoring a Channel For CLP1040 multi-channel modelsAbout the Li-Ion Battery Battery and Charger FeaturesBattery Features Battery LifeBattery Recycling and Disposal Removing the Lithium-Ion Li-Ion Battery Power Supply, Adapter and Drop-in Tray ChargerCharging a Standalone Battery Charging the BatteryEstimated Charging Time Charging with the Drop-in Tray Single Unit Charger SUC Charger LED Indicator Charging Status LEDsChecking Battery Status LEDBatteries Chargers Safety Information Operational Safety Guidelines Downloading the Customer Programming Software CPS Programming the Radio Through CPSRadio Programming Overview Programming the RadioFactory Default Settings Radio Cloning Cloning Radio SettingsCloning Instructions Radio Cloning What to do if cloning fails Cloning the Radio through a Multi-Unit Charger CLP Repeater Capability Working with RPX Programming the RPX through a Single Unit ChargerCLP Repeater Capability Working with RPX Programming the RPX through a Multi-Unit ChargerTroubleshooting Symptom Try thisCan either reduce obstructions or increase power 13 and Charger LED Indicator Section on Cannot activate VOX VOX feature might be OFF USE and Care If the portable is submerged in waterRadio Frequency and Code Charts CLP UHF FrequenciesRadiofrequency CCTSS/DPL Interference Eliminator Codes DPL What Does this Warranty Cover? Motorola Limited Warranty for the United StatesProducts and Accessories Exclusions Software What WE will do to Correct Warranty ProblemsHOW to Obtain Warranty Service or Other INFORMATION? WHO is COVERED?Software Copyright Notice Retain Your Original Proof of PurchasePatent Notice Export LAW AssurancesBatteries AccessoriesCarry Accessories ChargersAccessories Page 68012000044