Motorola CLP series, CLP1040, CLP1010 manual CLP Repeater Capability Working with RPX

Page 34

CLP REPEATER CAPABILITY: WORKING WITH RPX

4.Press the “Menu” button on the CLP radio to start the cloning process.

5.Once the cloning is completed, turn the RPX OFF and back ON again in order to activate the radio.

6.To clone another RPX, repeat steps 3, 4 and 5.

7.To exit clone mode on the CLP radio, turn the radio OFF.

Programming the RPX through a

Multi-Unit Charger

Programming the RPX through a Multi-Unit

Charger

1.Place the CLP radio into one of the charging pockets that has the “PROG” label indicated.

2.Connect the micro-USB plug of the micro- USB adapter cable with the RDX Serial Clone Cable into the micro-USB receptable charging pockets with the “PROG” label indicated.

3.Follow steps 4 through 7 under "Programming the RPX through a Single Unit Charger" on page 25.

26

Image 34

Contents Page Document Copyrights DisclaimerContents Programming the Radio Through CPS Batteries and Chargers Safety InformationRadio Frequency Code Charts Motorola Limited Warranty Radio CloningComputer Software Copyrights Radio Frequency RF Exposure Safety Standards Product Safety and RF Exposure ComplianceFCC Licensing Information FCC Licensing Information Introduction Radio Overview Getting Started Install the Battery Connecting an Audio Accessory Installing and Removing the Swivel Belt Clip Holster Adjusting the VolumeTurning the Radio On and Off Transmitting and Receiving Talk RangeOperation with Menu Settings HOW to StepDefault Channel Settings for CPS Selecting a ChannelFor CLP1010 single-channel models Sending Call Tone enabled through CPSMonitoring a Channel For CLP1040 multi-channel modelsAbout the Li-Ion Battery Battery and Charger FeaturesBattery Features Battery LifeBattery Recycling and Disposal Removing the Lithium-Ion Li-Ion Battery Power Supply, Adapter and Drop-in Tray ChargerCharging a Standalone Battery Charging the BatteryEstimated Charging Time Charging with the Drop-in Tray Single Unit Charger SUC Charger LED Indicator Charging Status LEDsChecking Battery Status LEDBatteries Chargers Safety Information Operational Safety Guidelines Downloading the Customer Programming Software CPS Programming the Radio Through CPSRadio Programming Overview Programming the RadioFactory Default Settings Radio Cloning Cloning Radio SettingsCloning Instructions Radio Cloning What to do if cloning fails Cloning the Radio through a Multi-Unit Charger CLP Repeater Capability Working with RPX Programming the RPX through a Single Unit ChargerCLP Repeater Capability Working with RPX Programming the RPX through a Multi-Unit ChargerTroubleshooting Symptom Try thisCan either reduce obstructions or increase power 13 and Charger LED Indicator Section on Cannot activate VOX VOX feature might be OFF USE and Care If the portable is submerged in waterRadio Frequency and Code Charts CLP UHF FrequenciesRadiofrequency CCTSS/DPL Interference Eliminator Codes DPL What Does this Warranty Cover? Motorola Limited Warranty for the United StatesProducts and Accessories Exclusions Software What WE will do to Correct Warranty ProblemsHOW to Obtain Warranty Service or Other INFORMATION? WHO is COVERED?Software Copyright Notice Retain Your Original Proof of PurchasePatent Notice Export LAW AssurancesBatteries AccessoriesCarry Accessories ChargersAccessories Page 68012000044