Motorola Cloning Techniques for CLP1040 and CLP Series Radios

Page 32

RADIO CLONING

Cloning Radios using the CLP Series Multi- Unit Charger (MUC) Kit P/N HKPN4007 (optional accessory)

Cloning the Radio through a Multi-Unit Charger

1.To put the source radio into clone mode, press and hold PTT and the “-” button while turning the radio ON until you hear the Cloning Tone and Double Blinking Orange on the Smart Status Glow.

2.Place the source radio into one of the charging pockets that has the “CLONE” label.

3.Turn the target radio ON and place it in the pairing charging pocket that has the “CLONE” label and start the cloning process.

4.Press the “Menu” button on the source radio to start the cloning process. The source radio generates the start clone tone.

5.Once the cloning is completed, turn the target radio OFF and back ON again in order to activate the radio.

6.To clone another radio, repeat steps 3, 4 and 5.

7.To exit clone mode on the source radio, turn the radio OFF.

24

Image 32

Contents Page Document Copyrights DisclaimerContents Batteries and Chargers Safety Information Radio Frequency Code Charts Motorola Limited WarrantyProgramming the Radio Through CPS Radio CloningComputer Software Copyrights Radio Frequency RF Exposure Safety Standards Product Safety and RF Exposure ComplianceFCC Licensing Information FCC Licensing Information Introduction Radio Overview Getting Started Install the Battery Connecting an Audio Accessory Turning the Radio On and Off Adjusting the VolumeInstalling and Removing the Swivel Belt Clip Holster Transmitting and Receiving Talk RangeOperation with Menu Settings HOW to StepDefault Channel Settings for CPS Selecting a ChannelSending Call Tone enabled through CPS Monitoring a ChannelFor CLP1010 single-channel models For CLP1040 multi-channel modelsBattery and Charger Features Battery FeaturesAbout the Li-Ion Battery Battery LifeBattery Recycling and Disposal Removing the Lithium-Ion Li-Ion Battery Power Supply, Adapter and Drop-in Tray ChargerEstimated Charging Time Charging the BatteryCharging a Standalone Battery Charging with the Drop-in Tray Single Unit Charger SUC Charger LED Indicator Charging Status LEDsChecking Battery Status LEDBatteries Chargers Safety Information Operational Safety Guidelines Programming the Radio Through CPS Radio Programming OverviewDownloading the Customer Programming Software CPS Programming the RadioFactory Default Settings Cloning Instructions Cloning Radio SettingsRadio Cloning Radio Cloning What to do if cloning fails Cloning the Radio through a Multi-Unit Charger CLP Repeater Capability Working with RPX Programming the RPX through a Single Unit ChargerCLP Repeater Capability Working with RPX Programming the RPX through a Multi-Unit ChargerTroubleshooting Symptom Try thisCan either reduce obstructions or increase power 13 and Charger LED Indicator Section on Cannot activate VOX VOX feature might be OFF USE and Care If the portable is submerged in waterRadio Frequency and Code Charts CLP UHF FrequenciesRadiofrequency CCTSS/DPL Interference Eliminator Codes DPL Products and Accessories Motorola Limited Warranty for the United StatesWhat Does this Warranty Cover? Exclusions What WE will do to Correct Warranty Problems HOW to Obtain Warranty Service or Other INFORMATION?Software WHO is COVERED?Software Copyright Notice Retain Your Original Proof of PurchasePatent Notice Export LAW AssurancesAccessories Carry AccessoriesBatteries ChargersAccessories Page 68012000044