Nortel Networks P0886634 manual Installing the DFC on systems equipped with DVCs

Page 21

Installing the DFC on systems equipped with DVCs 15

12.Fold the PEB cable so it lies flat against the card edges.

13.Replace the front cover and close the module door.

14.Plug the power cord into the AC outlet.

For a detailed description about installing a DVC, refer to the

Norstar Applications Module II Installation and Maintenance Manual.

P0886634 Issue 1.0

FAX Installation Guide

Image 21

Contents Norstar Voice Mail 4.0 FAX Installation Guide Page Contents FAX Installation Guide Regulatory information Repair facilities FAX overview Introduction to Norstar Voice Mail FAXFAX overview DFC overview SpeciﬁcationsSpecial tools Enabling the FAX software PrecautionsDVCs Shutting down the Norstar Voice Mail system Installation overviewUnlocking the module door Opening the NAMInstalling the DFC in the NAM Locating the expansion bus slots on a NAM Switch SW1 should be set according to the following table NAM PEB Cable installation example Installing the PEB CableDigital Voice Card Installing the PEB Cable Adding a Digital Voice Card after FAX is installed Installing the DFC on systems equipped with DVCs P0886634 Issue BIC Removing the BIC Keyboard/mouse backplane connector JP1 JP2 BIC connection points Re-installing the BIC in a NAM Re-installing the BIC in the NAMRe-installing the BIC in a new NAM Connecting the DFC to the BIC with the PEB Cable Connecting the BIC to the DFC in a NAM To connect the BIC to the DFC with the PEB cable Enabling the FAX software P0886634 Issue USA Comments Optional Your name Fax Company Norstar is a trademark of Northern Telecom. P0886634 Issue