22Installing the DFC on systems equipped with a BIC
Re-installing the BIC in the NAM
Before you begin to install the BIC, ensure you use an antistatic strap to ground yourself.
To
1.Ground yourself by attaching one end of the grounding strap to your wrist and the other end to a grounded metal surface.
2.Locate expansion slot 2 for a NAM II and slot 4 for a new NAM.
3.Gently push the large ribbon cables leading to the SBC flat against the backplane. This allows for easier installation of the BIC.
4.Carefully hold the BIC along the top. Insert the card by aligning it between the metal groove on one side and the slot opening on the other side.
Figure 16 Re-installing the BIC in a NAM II
Slot 2
BIC
FAX Installation Guide | P0886634 Issue 1.0 |