Introduction to Norstar Voice Mail FAX 3
DFC overview
The Digital Fax Card (DFC) is installed in an expansion bus slot on the Norstar Application Module (NAM) and supports four Fax Channels.
There are no Time Compression Multiplexing (TCM) connections to the DFC. The DFC uses the Voice Channels on the Digital Voice Cards (DVCs) or BIC to connect the Fax Channels to fax machines or a call.
Note: When Norstar Voice Mail FAX is using a Voice Channel to connect to the fax machine or a caller, that Voice Channel cannot be used by other users until the FAX function is complete.
Specifications
The DFC is an AT bus compatible card that provides:
•9600 baud with
•DTMF generate and detect
•error correction mode
•fine and normal image resolution
•V.21, V.27, V.29, T.4 (MH&MR), T.6 (MMR), T.30 protocols
•four Group III analog Fax Channels
Special tools
Before you begin replacing or upgrading the components, ensure you have the following equipment:
•#2 Phillips head screwdriver with a 3.5 in. long blade
•3/16 in. slot screwdriver
•an antistatic grounding strap
•3/16 in. nut driver (recommended)
You may also need the Norstar Applications Module Installation and Maintenance Manual. The Norstar Applications Module Installation and Maintenance Manual is included on the Norstar Voice Mail 4.0 Documentation and Client Software CD- ROM. All the Norstar Voice Mail Installation Manuals on the
CAUTION
You must wear an antistatic grounding strap at all times when handling electronic components. Failure to do so may result in damage to the equipment.
P0886634 Issue 1.0 | FAX Installation Guide |