Chapter 4 Software Troubleshooting 45
Table 9 Preferences details fields for lines (Sheet 3 of 3)
Attribute
Value
Description
Legend: Loop = analog/digital loop; GS = ground start; DID = DID; E&M = E&M; BRI = BRI; DPNSS
=DPNSS; VoIP = VoIP; TL = Target and DASS2. Note: PRI fields are all included under the main panel.
Warning: Enable modules
If you disabled any trunk media bay modules prior to performing programming, enable them now to ensure your system will function properly.
Restrictions
Assigning Line restrictions and Remote Access Package restrictions are part of the configuration for controlling calls out of the system (line restrictions) and into the system from a private network node or from a remote user calling in over the PSTN lines (Remote Access Packages).
The Restrictions tab shows the restrictions for a line.
Table 10 describes the fields on this panel.
Table 10 Restrictions
Attribute | Values | Description |
|
|
|
Use remote package | <remote package #> | If the line is being used to receive external calls or calls |
|
| from other nodes on the private network, ensure that |
|
| you indicate a remote package that provides only the |
|
| availability that you want external callers to have. This |
|
| attribute is typically used for tandeming calls. |
|
|
|
Schedule | Default: Normal, Night, Evening, Lunch, Sched 4, Sched 5, Sched 6 | |
|
|
|
Line Restrictions - | Enter the restriction filter number that applies to each | |
Use Filter |
| schedule. |
|
| (controls outgoing calls) |
|
|
|
Remote Restrictions | Enter the restriction filter that applies to each schedule. | |
- Use Filter |
| This setting provides call controls for incoming calls over |
|
| a private network or from remote user dialing in over |
|
| PSTN) |
|
|
|