Chapter 4 Software Troubleshooting 47
5Select the optional components that you want to include from the backup file.
6Click the OK button.
A warning window opens and displays information about components that will be affected by the restore operation. Read the warning carefully before proceeding.
7Click the Yes button to proceed.
A progress window opens. When the operation is complete, the Restore Complete window opens.
8Click the OK button.
Restoring the factory configuration
Caution: A restore operation is a
To restore the factory configuration
Your BCM450 is delivered with a backup file that was created at the factory. This file can be a helpful starting point if you decide to completely
1In the task panel, click the Administration tab.
2Open the Backup and Restore folder, and then click Restore. The Restore panel opens.
3In the Restore From selection field, select Factory Default. A warning dialog box displays.
4Click the Restore button.
The Select Components to Restore panel opens.
5Select the optional components that you want to include from the backup archive.
6Click the OK button.
A warning window opens and displays information about components that will be affected by the restore operation. Read the warning carefully before proceeding.
7Click the Yes button to proceed.
A progress window opens. When the operation is complete, the Restore Complete window opens.
8Click the OK button.