NEC R1000 manual Features and Specifications For Xen IPK, Attendant Transfer, Terminal Type

Page 41

Features and Specifications

 

for Xen IPK

Chapter 3

Attendant Transfer

A-15

 

 

 

 

 

 

FEATURE

DESCRIPTION

SYSTEM

AVAILABILITY

OPERATING PROCEDURES

September 2003

Doc. No. 8283 - Release 1.0

Attendant Transfer permits efficient call transfers in the system using an Attendant Multiline Terminal equipped with one to four Attendant Add-On Console(s). Transferred calls can be voice announced, camped-on (when the station is busy), or directly transferred to ring at stations. After a programmed time, all unanswered transferred calls return to the Attendant with distinct audible and visual indications.

Terminal Type

Any display Multiline Terminal programmed as an Attendant Position.

Required Components

DCR-60-1A/DCU-60-1A Console

From the Attendant Position with a CO/PBX call in progress:

1.Press the DSS key on the Attendant Add-On Console or the Attendant Position for the desired station.

2.Wait for ringback tone or voice announcement.

3.Press Non the Attendant Add-On Console or on the Attendant Position. The call is transferred.

4.Hang up.

5.After time-out, when the transferred call is not answered, a recall tone is received at the Attendant Position; and the LED on the assigned CO/PBX line key or Call Appearance Key returns to flashing green.

6.Press the CO/PBX line key with the flashing green LED to return to the call.

Features and Specifications for Xen IPK

Chapter 3 – 33

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Xen IPK This page Intentionally Left Blank Preface & Disclaimer Preface & Disclaimer Important Note About this Upgrade Procedure September Table of Contents 13-00 11-2-0413-04 13-05Chapter Xen IPK R1000 Upgrade Procedure for Xen Axis/ MasterChapter Direct Download from the Installed Xen System Only the Xen Axis system can be saved as Xen IPK Basic Chapter Direct Download from the Installed Xen System Upgrade Type Comments Chapter Direct Download from the Installed Xen System Click Hardware Upload When Upload is complete, click Close Chapter Direct Download from the Installed Xen System C T I O N September Only the Xen Axis system can be saved as Xen IPK Basic Upgrade Type Comments September September September For MIFM-U Software Verification for Mifm -U ETU For PRT1-U ETU Software Verification Adding AN Earth Connection B64-U23 KSU Hardware Description and Specifications for Xen IPK ChapterB64-U23 KSU Cpui -U ETU DescriptionInstallation SW1-1 SW1-2 Description Switch SettingsSW1-3 Description SW3-1 DescriptionDescription Flashing Off Replacing Memory BackupLED Indications Description Basic Port Expanded PKU 192-UA Port Key UnitESIB8-U ETU MDF ConnectionsESIE8-U ETU Pin Assignments MJ1 Pin Signal Signal Name Pin ColourMJ2 Pin Signal Signal Name Pin Colour This page Intentionally Left Blank Attendant Transfer Features and Specifications For Xen IPKTerminal Type Required ComponentsGeneral Feature Feature Name NumberShortcut Key ¶+BTTCall Arrival CAR Keys Restrictions Basic Port Expanded Feature Feature Name Number Call Appearance CAP Keys46/47 001 To return a call to the name/number displayed on the LCD Caller ID IncomingTo display a stored Caller ID Caller ID Indication Manual OperationScrolling Caller ID with Return Call General September Caller ID Indication disappears Mobile Pay Phone Out of Area Private Data Error Related Features ListShortcut Key Line Key Order Memory AttendantSystem Data Name Function Block Optional Components Dterm Series i Multiline TerminalsD-19Specifications Refer to individual feature for detailsGeneral Other TerminalButton Units Feature Name Number DTU-type Multiline Terminal MigrationD-20 September To change the LCD contrast for Multiline Display Terminals Electronic Volume ControlTo change the off-hook ringing volume To set the speaker volume To change the station ringing volumeTo set the handset receiver volume 46/47 049 Related Feature List Guide to Feature ProgrammingExternal Zone Paging Meet-Me E-6 To originate using a Multiline TerminalTo answer using a Multiline Terminal To answer using a Single Line Telephones To originate using a Single Line Telephones46/47 074 ~ 081 Full Duplex Handsfree To use the HFU-UA using an DTU--type Multiline Terminal¶+BTM HFU Selection Not applicable Data Assignment ISDN-BRI Trunk ConnectionsGeneral Xen IPK Expanded Order System Data Name CO Line ServiceOrder Memory System Data Name Function Calling Party Number CPN ServiceISDN-PRI Trunk Connections Not applicable Data Assignment for ISDN-PRI Installation Data Assignments for Caller ID Calling Party Number CPN Data Assignment for CO Line ServicesData Assignment for did Line Services General Xen IPK Expanded Isdn PRI Installation System Data Name Function Did Line ServiceCalling Party Number CPN Presentation from Station Music on Hold Example Guide to Feature Programming Station Transfer Using a Multiline Terminal with a call in progressUsing a Single Line Telephone with a call in progress Direct Station Selection DSS Package Universal SlotsNot applicable PRT4 4 ports, 4 B channels z PRT8 8 ports, 8 B channels Maximum Capacities Station Interface Units Description IPT4-U ETU installed as a COI/COID4-U ETU ESI8 ETUs NO. Maximum NO.Other ETUs Gruide to Feature Programming Programming General Description SettingsDisplay + BKRelated Programming Programming ProceduresPRI Channel Assignment + AN Settings+ AN PRT B Channel Outgoing Priority SelectionPRT B Channel-to-Trunk Group Assignment + BCT Trunk-to-MOH Trunk AssignmentMultiline Terminal Type Selection + BTM Programming Procedures50, Multiline Terminal Type Selection Draft 3 MOH or Ring Back Tone Selection 66, MOH or Ring Back Tone Selection Draft 3 + BTT LCD Line Key Name Assignment68, LCD Line Key Name Assignment Draft 3 + BS Card Interface Slot AssignmentCard Interface Slot Assignment Draft 3 Draft Card Interface Slot Assignment ACD+/CMS/FMS/VMS KSU Power-Based ETU Quantity LimitationsEXP KTU Card Interface Slot AssignmentMIF ACD Assignment This page Intentionally Left Blank

R1000 specifications

The NEC R1000 is an advanced server system designed for high-performance computing and enterprise applications. Offering numerous features and cutting-edge technologies, the NEC R1000 aims to meet the demands of businesses looking for efficiency, reliability, and scalability.

One of the defining characteristics of the NEC R1000 is its modular architecture. This design allows users to customize the server according to their specific needs. With a variety of configurations available, businesses can choose the optimum specifications for CPU, memory, and storage, facilitating the deployment of tailored solutions for various workloads, such as virtualization, big data analytics, or cloud computing.

The NEC R1000 is powered by the latest generation of Intel Xeon processors, which offer significant improvements in performance compared to previous iterations. With support for multiple cores and threads, the server can efficiently manage concurrent processes, making it well-suited for demanding applications. Additionally, the server supports advanced memory technologies, including DDR4 RAM, providing increased memory bandwidth and speed, essential for data-intensive tasks.

Storage is another area where the NEC R1000 excels. The server supports various storage configurations, including SSDs and traditional hard drives, allowing for a mix of performance and capacity. It incorporates advanced RAID technologies, ensuring data redundancy and resilience against failures. This capability is particularly important for businesses that rely on uptime and data integrity.

In terms of connectivity, the NEC R1000 features high-bandwidth networking options, including 10GbE and higher, facilitating fast data transfer between servers and storage devices, as well as with external networks. This is crucial for performance in environments such as data centers and distributed applications.

Energy efficiency is a key focus of the NEC R1000. It is equipped with power management technologies that optimize energy consumption without compromising performance. These technologies help enterprises reduce operational costs and minimize their carbon footprint.

Additionally, the NEC R1000 is designed with enhanced security features, including secure boot and trusted platform modules (TPM), which help protect sensitive data and ensure the integrity of the server's firmware.

In conclusion, the NEC R1000 is an efficient and robust server solution, featuring modular architecture, powerful processors, various storage options, high connectivity, and energy-efficient technologies. Its adaptability makes it suitable for a wide range of enterprise applications, ensuring that businesses have the resources they need to thrive in a competitive landscape.
Top Page Image Contents