NEC R1000 manual ISDN-BRI Trunk Connections, Not applicable Data Assignment

Page 68

September 2003	NEC Business Solutions Ltd

ISDN-BRI Trunk Connections		I-7

FEATURE	ISDN-BRI (Integrated Service Digital Network - Basic Rate Interface) is a
DESCRIPTION	Public Switched Telephone Network (PSTN) service that provides two B
	channels (2B + D) for voice call trunking. The B channels are used to
	provide two CO/PBX type connections. Caller ID is a standard feature on
	ISDN-BRI provided trunks. Caller ID indication displays the calling party
	telephone number on the LCD of the Multiline Terminal for CO incoming
	calls. This interface provides voice communication path only.
	Malicious Call Trace is available for the Australian Network.
	Stimulus type network supplementary services (Keypad mode of operation)
	is also available.

SYSTEM

AVAILABILITY

OPERATING PROCEDURES

SERVICE

CONDITIONS

Terminal Type

Not applicable

Required Components

To provide ISDN trunk connection:

zBRT(4)-U( ) ETU

zCLKG-U( ) Unit

Not applicable.

Data Assignment

	Use Memory Block 1-1-80 (ISDN DTMF Duration/Interdigit Selection)
	to specify tone duration (default:100ms.) and interdigit time
	(default=70ms.) of DTMF signals for the ISDN trunk.
	Use Memory Block 1-1-81 (ISDN Dial Interval Time Selection) to
	specify the time (default: 4s) between dialled digits.
	Use Memory Block 1-8-33 (Master Clock Selection) to assign the
	necessary source for synchronisation clocking.
	Use Memory Clock 3-29 (Trunk Interval Transmit Pad Selection) to
	specify Internal Transmit (default: 8 dB) Pad (Volume) control.	1.0
	Use Memory Block 3-31 (Trunk External Transmit Pad Selection) to	1.0
		Release-8283No.Doc.	2003September
	specify External Transmit (default: 0 dB) Pad control.	Release-8283No.Doc.	2003September
	specify External Transmit (default: 0 dB) Pad control.
	Use Memory Block 3-32 (Trunk External Receive Pad Selection) to
	specify External Receive (default: 9 dB) Pad control.
	Use Memory Block 3-52 (ISDN Trunk Directory Number Assignment)
	to assign the ISDN directory Number.

60 – Chapter 3

ISDN-BRI Trunk Connections I-7

Image 68

Contents

Xen IPK This page Intentionally Left Blank Preface & Disclaimer Preface & Disclaimer Important Note About this Upgrade Procedure September Table of Contents 11-2-04 13-0013-04 13-05Xen IPK R1000 Upgrade Procedure for Xen Axis/ Master ChapterChapter Direct Download from the Installed Xen System Only the Xen Axis system can be saved as Xen IPK Basic Chapter Direct Download from the Installed Xen System Upgrade Type Comments Chapter Direct Download from the Installed Xen System Click Hardware Upload When Upload is complete, click Close Chapter Direct Download from the Installed Xen System C T I O N September Only the Xen Axis system can be saved as Xen IPK Basic Upgrade Type Comments September September September For MIFM-U Software Verification for Mifm -U ETU For PRT1-U ETU Software Verification Adding AN Earth Connection Hardware Description and Specifications for Xen IPK Chapter B64-U23 KSUCpui -U ETU Description B64-U23 KSUInstallation Switch Settings SW1-1 SW1-2 DescriptionSW1-3 Description SW3-1 DescriptionDescription Flashing Off Replacing Memory BackupLED Indications PKU 192-UA Port Key Unit Description Basic Port ExpandedESIB8-U ETU Connections MDFESIE8-U ETU MJ1 Pin Signal Signal Name Pin Colour Pin AssignmentsMJ2 Pin Signal Signal Name Pin Colour This page Intentionally Left Blank Features and Specifications For Xen IPK Attendant TransferTerminal Type Required ComponentsFeature Feature Name Number GeneralShortcut Key ¶+BTTCall Arrival CAR Keys Restrictions Basic Port Expanded Feature Feature Name Number Call Appearance CAP Keys46/47 001 To return a call to the name/number displayed on the LCD Caller ID IncomingTo display a stored Caller ID Manual Operation Caller ID IndicationScrolling Caller ID with Return Call General September Caller ID Indication disappears Related Features List Mobile Pay Phone Out of Area Private Data ErrorShortcut Key Line Key Order Memory AttendantSystem Data Name Function Block Dterm Series i Multiline TerminalsD-19 Optional ComponentsRefer to individual feature for details SpecificationsGeneral Other TerminalButton Units Feature Name Number DTU-type Multiline Terminal MigrationD-20 September To change the LCD contrast for Multiline Display Terminals Electronic Volume ControlTo change the off-hook ringing volume To set the speaker volume To change the station ringing volumeTo set the handset receiver volume Related Feature List Guide to Feature Programming 46/47 049External Zone Paging Meet-Me E-6 To originate using a Multiline TerminalTo answer using a Multiline Terminal To originate using a Single Line Telephones To answer using a Single Line Telephones46/47 074 ~ 081 To use the HFU-UA using an DTU--type Multiline Terminal Full Duplex Handsfree¶+BTM HFU Selection ISDN-BRI Trunk Connections Not applicable Data AssignmentGeneral Xen IPK Expanded CO Line Service Order System Data NameCalling Party Number CPN Service Order Memory System Data Name FunctionISDN-PRI Trunk Connections Not applicable Data Assignment for ISDN-PRI Installation Data Assignments for Caller ID Calling Party Number CPN Data Assignment for CO Line ServicesData Assignment for did Line Services General Xen IPK Expanded Isdn PRI Installation Did Line Service System Data Name FunctionCalling Party Number CPN Presentation from Station Music on Hold Example Guide to Feature Programming Station Transfer Using a Multiline Terminal with a call in progressUsing a Single Line Telephone with a call in progress Direct Station Selection DSS Package Universal SlotsNot applicable PRT4 4 ports, 4 B channels z PRT8 8 ports, 8 B channels Maximum Capacities Station Interface Units Description IPT4-U ETU installed as a COI/COID4-U ETU ESI8 ETUs NO. Maximum NO.Other ETUs Gruide to Feature Programming Programming Settings General DescriptionDisplay + BKProgramming Procedures Related Programming+ AN Settings PRI Channel AssignmentPRT B Channel Outgoing Priority Selection + ANPRT B Channel-to-Trunk Group Assignment Trunk-to-MOH Trunk Assignment + BCT+ BTM Programming Procedures Multiline Terminal Type Selection50, Multiline Terminal Type Selection Draft 3 MOH or Ring Back Tone Selection 66, MOH or Ring Back Tone Selection Draft 3 LCD Line Key Name Assignment + BTT68, LCD Line Key Name Assignment Draft 3 Card Interface Slot Assignment + BSCard Interface Slot Assignment Draft 3 Draft Card Interface Slot Assignment KSU Power-Based ETU Quantity Limitations ACD+/CMS/FMS/VMSCard Interface Slot Assignment EXP KTUMIF ACD Assignment This page Intentionally Left Blank